So I finally finished the last of my Honda conversion. Woohoo. This is my D.I.Y but I'll post it here cause it's minor

So here is the new key. It's from a Honda Accord and it's been modified to use my acura key





So first I took it over to ace hardware and had my key cut



Then I took a razor blade and cut open the old key to remove the immobilizer



there it is in the center





now I open the new key fob and pull out the factory immobilizer for the accord



put the RSX one in the accord key



and BAM! Now I have my new key and a blank spare!





now time to program the new fob

Turn the ignition switch ON (II).
Within 1 to 4 sec. , push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit.
Within 1 to 4 sec. , turn the ignition switch OFF.
Within 1 to 4 sec. , turn the ignition switch ON (II).
Within 1 to 4 sec. , push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit.
Within 1 to 4 sec. , turn the ignition switch OFF.
Within 4 sec. , turn the ignition switch ON (II).
Within 1 to 4 sec. , push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit.
Within 1 to 4 sec. , turn the ignition switch OFF.
Within 4 sec. , turn the ignition switch ON (II).
Within 1 to 4 sec. , push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit.
Confirm you can hear the sound of the door lock actuators. Within 1 to 4 sec., push the transmitter lock or unlock button again.
Within 10 sec. , aim the remaining transmitters (up to two additional ones) whose codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored.
Turn the ignition switch OFF, and pull out the key.
Confirm proper operation of the transmitters.




ENJOY!

 

NICEE!

 

i thought it was a RHD conversion.

nice stuff though

 

Sweet

 

conversions suck! lol, good job...

 

haha so much work thats not even on my list... fawk that.

 

 

Nice

 

will those progaming steps work with different transmitters? i have an acura transmitter that i have been trying to program to my dc5 yet no luck

 

bad pictures but you get the idea... the back half of the key fob I ordered finally came in today woohoo! Straight from Japan

 

both my stock Acura key fobs and the new honda key fob work with the car... so the steps should work for you yes

 

i know this is a pic thread but i have a quick question, i am currently doing a 04 - 05 conversion, (new lights/ bumpers). i am having trouble with the front lights, the nighttime lights fit perfectly but the signal and daytime running lights/high beams, dont fit. i know for a fact that the wiring harness is different for the front but it goes for 450$. anyone know any other options???

 

Create a "New Topic"

No need to thread jack haha. Create a new thread and you will get better results, instead of filling someone else's thread with all of your Q and A's...

 

nice work man!

i wanna do that flip out key one.

 

wow...nice.

 

Nice! Cool to see something totally different fabbed up.

 

sweet, nice write up

 

Nice

 

nice where can i haz backplate

 

what the hell did you just ask if that was even a question?

 

Lol forgot this isn't crsx....where can I get that backplate? And addition to the question, how can you get the acura key modified to work with the accord cover, because I know accord keys don't have the same cut out as ours

 

I got the red H back cover on ebay

you have to use an acura key and glue it into the honda key casing.

 

When you JB Welded the stock key to the fob, did you drill a hole in the key so you could get that small little screw in?

 

Nuf said

 

that is still on my list.... but it stays clipped together on it's own so far