Ls eagle rods, B16 tranny, Ls block, more...!
Thread Starter
Honda-Tech Member
Joined: Jan 2006
Posts: 439
Likes: 0
From: 8C6T0
Ls eagle rods, B16 tranny, Ls block, more...!
Hows it going guys, i need some more money to finish my summer project so i have some clearing to do. Pics will be up after this weekend.
I have an ls bottom end, bored to 81.5. Sleeves have surface rust, just needs hone. 100$
Balanced ls crank. Never run in the car since leaving the machine shop. 150$
Ls eagle rods, BNIB never run. These have been sitting in my basement and have very slight amount of rust on the bearing surface. This shouldn't cause any issues, i oiled them to prevent further surface rust. 250$
B16 transmission, disassembled. Bought this off a fellow H-T member but decided to go a different route. Only taken apart to remove limited slip diff, missing stock differential. 300$
I also have a few ecu's.
USDM p30, very rare from del sol dual cam vtec 150$
Obd2 P72 gsr ecu 100$
Obd2 p75 ls ecu 100$
Obd2 P2P d16y8 ecu 75$
Located in CT, willing to ship all the small stuff. Bigger items we will have to discuss. Local Pickup preferred.
Open to trades for many different things!
Needed=
Aftermarket B16 intake(skunk 2, blox, ect.)
B series headers(No DC unless 1 peice)
Clutch
Flywheel
I have an ls bottom end, bored to 81.5. Sleeves have surface rust, just needs hone. 100$
Balanced ls crank. Never run in the car since leaving the machine shop. 150$
Ls eagle rods, BNIB never run. These have been sitting in my basement and have very slight amount of rust on the bearing surface. This shouldn't cause any issues, i oiled them to prevent further surface rust. 250$
B16 transmission, disassembled. Bought this off a fellow H-T member but decided to go a different route. Only taken apart to remove limited slip diff, missing stock differential. 300$
I also have a few ecu's.
USDM p30, very rare from del sol dual cam vtec 150$
Obd2 P72 gsr ecu 100$
Obd2 p75 ls ecu 100$
Obd2 P2P d16y8 ecu 75$
Located in CT, willing to ship all the small stuff. Bigger items we will have to discuss. Local Pickup preferred.
Open to trades for many different things!
Needed=
Aftermarket B16 intake(skunk 2, blox, ect.)
B series headers(No DC unless 1 peice)
Clutch
Flywheel
Last edited by killercannible; Aug 11, 2009 at 07:35 AM.
Thread Starter
Honda-Tech Member
Joined: Jan 2006
Posts: 439
Likes: 0
From: 8C6T0
Re: Ls eagle rods, B16 tranny, Ls block, more...!
Some pics up, more pics to come. Block has been consistently oiled since 2007 so has the crank, no worries!
Last edited by killercannible; Aug 11, 2009 at 07:37 AM. Reason: old picture
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
