B16 Cable Trans w/ LS 5th, H4H bulbs, AEM Brake Pads, Ohlins struts, 3 sets of wheels
Thread Starter
Honda-Tech Member
Joined: Jul 2005
Posts: 758
Likes: 0
From: Cumming, GA, USA
B16 Cable Trans w/ LS 5th, H4H bulbs, AEM Brake Pads, Ohlins struts, 3 sets of wheels
10/06/2009 UPDATE!: I've got another S1 B16 Cable Transmission with LS 5th (90-91 small spline) - perfect condition - no grinds - $SOLD!
Specs (B16 1st-4th, LS 5th):
1st 3.250 , 2nd 2.052 , 3rd 1.416 , 4th 1.103 , 5th 0.742 , FD 4.40
Also have a used 90-91 Stage 5 Competition Clutch will throw in for $50 extra with the transmission or sell for $100 separately (part number 8017-1420).
(pressure plate has some light surface rust from sitting in the garage for a while that should sand right off... need to sand to get a non-directional finish anyway)
(pressure plate has some light surface rust from sitting in the garage for a while that should sand right off... need to sand to get a non-directional finish anyway)
Ohlins Integra Type R spec struts and stock rear ITR struts and control arms - Ohlins SOLD!!! Still have the ITR LCA's with Prothane bushings - $80 shipped and stock ITR rear struts - $75 shipped
(old pics - the springs and tophats on the Ohlins were already sold)
Nokya H4H bulbs (fit the JDM DA headlights) - 2500K Hyper Yellow 70/80W - $30/set (have a couple extra sets)
I have 2 brand new sets of AEM Front Brake Pads (made by NISSIN = maker of OEM Honda brake parts = good stuff). Part number 26-125. $45/set picked up or $50/set shipped
JUST ADDED MORE WHEELS!
Kosei S5R (Rare and Oldschool)
Size: 17x7
Offset:+48
Bolt Pattern: 4x100
Color: Gunmetal with blue lip
Made in: Japan
Condition: Need repainting – paint flaking on lip after mounting and removing tires. Crack on back of one wheel needs rewelding (amazingly still held air).
Price without tires: $200! COME AND GET THEM!
Cracked wheel:
Jaknife F25 (Rare and Oldschool)
Size: 17x7
Offset:+40ish?
Bolt Pattern: 4x100 and 4x114.3
Color: Silver with polished lip
Made in: Japan
Tires: Will ship without tires. I can throw a set of well used 205/40/17 Goodyear Eagle GS-D3 on them if you are local so you have something to roll on (might get a month out of them).
Condition: No curbing. Clear coat has seen better days. Slight bend in the face of one wheel.
Price with tires: $450 OBO
Price without tires: $450 OBO
Slight bend in lip:
Alessio Futura
Size: 16x7.5
Offset:+35
Bolt Pattern: 4x100
Color: Silver
Made in: Italy
Tires: 205/45/16 Toyo Proxes (only have 3 tires and have camber wear – they are also fairly dry from sitting for a couple of years... can remove if wanted)
Condition: Need repainting. One wheel has been partially stripped. Light curb marks on lips (could easily be sanded out).
Price with tires: $150! COME AND GET THEM!
Partially stripped wheel:
CHECK BACK FOR MORE!
The only parts that I would trade for are:
- 90-93 Integra black RS door panels (the ones with the manual window cranks)
- 90-93 Integra wingless white hatch, 92-93 white bumpers, and white hood (if they aren't near perfect, I'm better off repainting the parts I have)
- bad B-series manual transmissions for parts (grinding snchros, bad bearings, etc - I just need the gears)
- 16" wheels with good tires (if they aren't made in Japan, I probably don't want them)
Specs (B16 1st-4th, LS 5th):
1st 3.250 , 2nd 2.052 , 3rd 1.416 , 4th 1.103 , 5th 0.742 , FD 4.40
Also have a used 90-91 Stage 5 Competition Clutch will throw in for $50 extra with the transmission or sell for $100 separately (part number 8017-1420).
(pressure plate has some light surface rust from sitting in the garage for a while that should sand right off... need to sand to get a non-directional finish anyway)
(pressure plate has some light surface rust from sitting in the garage for a while that should sand right off... need to sand to get a non-directional finish anyway)
Ohlins Integra Type R spec struts and stock rear ITR struts and control arms - Ohlins SOLD!!! Still have the ITR LCA's with Prothane bushings - $80 shipped and stock ITR rear struts - $75 shipped
(old pics - the springs and tophats on the Ohlins were already sold)
Nokya H4H bulbs (fit the JDM DA headlights) - 2500K Hyper Yellow 70/80W - $30/set (have a couple extra sets)
I have 2 brand new sets of AEM Front Brake Pads (made by NISSIN = maker of OEM Honda brake parts = good stuff). Part number 26-125. $45/set picked up or $50/set shipped
JUST ADDED MORE WHEELS!
Kosei S5R (Rare and Oldschool)
Size: 17x7
Offset:+48
Bolt Pattern: 4x100
Color: Gunmetal with blue lip
Made in: Japan
Condition: Need repainting – paint flaking on lip after mounting and removing tires. Crack on back of one wheel needs rewelding (amazingly still held air).
Price without tires: $200! COME AND GET THEM!
Cracked wheel:
Jaknife F25 (Rare and Oldschool)
Size: 17x7
Offset:+40ish?
Bolt Pattern: 4x100 and 4x114.3
Color: Silver with polished lip
Made in: Japan
Tires: Will ship without tires. I can throw a set of well used 205/40/17 Goodyear Eagle GS-D3 on them if you are local so you have something to roll on (might get a month out of them).
Condition: No curbing. Clear coat has seen better days. Slight bend in the face of one wheel.
Price with tires: $450 OBO
Price without tires: $450 OBO
Slight bend in lip:
Alessio Futura
Size: 16x7.5
Offset:+35
Bolt Pattern: 4x100
Color: Silver
Made in: Italy
Tires: 205/45/16 Toyo Proxes (only have 3 tires and have camber wear – they are also fairly dry from sitting for a couple of years... can remove if wanted)
Condition: Need repainting. One wheel has been partially stripped. Light curb marks on lips (could easily be sanded out).
Price with tires: $150! COME AND GET THEM!
Partially stripped wheel:
CHECK BACK FOR MORE!
The only parts that I would trade for are:
- 90-93 Integra black RS door panels (the ones with the manual window cranks)
- 90-93 Integra wingless white hatch, 92-93 white bumpers, and white hood (if they aren't near perfect, I'm better off repainting the parts I have)
- bad B-series manual transmissions for parts (grinding snchros, bad bearings, etc - I just need the gears)
- 16" wheels with good tires (if they aren't made in Japan, I probably don't want them)
Last edited by phatcardesignz; Oct 31, 2009 at 10:51 AM.
Thread Starter
Honda-Tech Member
Joined: Jul 2005
Posts: 758
Likes: 0
From: Cumming, GA, USA
Re: H&R EF/DA coilovers, 4x100 Volk GT-C's, H4H bulbs, ITR Ohlins struts, B16 Cable T
Thanks for the bumps! Yeah, Greg was one of the previous owners of the wheels... they've been traded around a lot and still look amazing.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jul 2005
Posts: 758
Likes: 0
From: Cumming, GA, USA
Re: H&R EF/DA coilovers, 4x100 Volk GT-C's, H4H bulbs, ITR Ohlins struts, B16 Cable T
bumping again...
any interest? offers?
I just listed the coilovers on eBay, but if anyone on here wants them, I can cancel the listing.
any interest? offers?
I just listed the coilovers on eBay, but if anyone on here wants them, I can cancel the listing.
