91 Honda CRX LS/VTEC!!
Thread Starter
Junior Member
Joined: Apr 2007
Posts: 202
Likes: 0
From: Hinesville, GA, US
91 Honda CRX LS/VTEC!!
UP for sale is my 91 crx. selling due to me moving overseas. asking price is 3500 OBO...or trade!
Email Me for more info at BoostedEg@hotmail.com
here is a list of things that have been done to the car...
Car:
1991 crx HF
278k miles on chassis
8k on motor
megan racing coilovers with KYB AGX shocks.
Brand New tie rods, ball joints, axles
interior has a momo sterring wheel
sparco shiftknob
93 integra gsr seats
dash has no cracks, just the climate control, (normal for a crx)
kenwood head unit
12" sub
8k HID's
JDM Yellow High Beams
Yellow fogs
Si front Lip
Engine Mods:
b18a block 8k miles since rebuild
b16 head 58k miles
b16 tranny 58k miles
arp head studs, rod bolts, main studs
golden eagle ls vtec kit
acl rod and main bearings. acl thrust washers
type r oil pump
oem honda piston rings
all new gaskets and seals
stage 2 f1 racing clutch
f1 racing 9lbs. flywheel.
arp flywheel and pressure plate bolts.
B16 PR3 ECU
Innovative Motor Mounts
Hasport shift linkage
DA integra front brakes
DIY Intake
3" Dynomax Super Turbo Muffler, 2 1/2" piping with high flow cat.
Ebay Header, Not installed yet.
The Bad:
passenger side needs new wheel bearings
tranny has a small grind going into 2nd gear...will throw in another tranny for free
car was gutted in the rear but have all the trim in my storage room
other then that the car is good, is very reliable and fun to drive, pulls really hard.
car no longer has these wheels, it will be sold with Polished 2000 Civic SI wheels.
these are the most recent pics. i finnally got around to putting the SI wheels on.
Email Me for more info at BoostedEg@hotmail.com
here is a list of things that have been done to the car...
Car:
1991 crx HF
278k miles on chassis
8k on motor
megan racing coilovers with KYB AGX shocks.
Brand New tie rods, ball joints, axles
interior has a momo sterring wheel
sparco shiftknob
93 integra gsr seats
dash has no cracks, just the climate control, (normal for a crx)
kenwood head unit
12" sub
8k HID's
JDM Yellow High Beams
Yellow fogs
Si front Lip
Engine Mods:
b18a block 8k miles since rebuild
b16 head 58k miles
b16 tranny 58k miles
arp head studs, rod bolts, main studs
golden eagle ls vtec kit
acl rod and main bearings. acl thrust washers
type r oil pump
oem honda piston rings
all new gaskets and seals
stage 2 f1 racing clutch
f1 racing 9lbs. flywheel.
arp flywheel and pressure plate bolts.
B16 PR3 ECU
Innovative Motor Mounts
Hasport shift linkage
DA integra front brakes
DIY Intake
3" Dynomax Super Turbo Muffler, 2 1/2" piping with high flow cat.
Ebay Header, Not installed yet.
The Bad:
passenger side needs new wheel bearings
tranny has a small grind going into 2nd gear...will throw in another tranny for free
car was gutted in the rear but have all the trim in my storage room
other then that the car is good, is very reliable and fun to drive, pulls really hard.
car no longer has these wheels, it will be sold with Polished 2000 Civic SI wheels.
these are the most recent pics. i finnally got around to putting the SI wheels on.
Last edited by Boosted_CRX_507; Aug 16, 2009 at 04:08 PM. Reason: new pics
Trending Topics
Honda-Tech Member
Joined: Feb 2008
Posts: 536
Likes: 1
From: Hartselle, AL, US
Re: 91 Honda CRX LS/VTEC!!
interested in a teal 94 coupe with a fresh d16 swap. its a great driver with no mechanical problems other than no ac. the full ac setup is there, i think the condensor has a leak though.its on h-t.
Honda-Tech Member
Joined: May 2005
Posts: 77
Likes: 0
From: Fort Mill, SC, US of A
Re: 91 Honda CRX LS/VTEC!!
how about a trade for a 89 mustang gt supercharged??? http://charlotte.craigslist.org/cto/1399526724.html
Thread
Thread Starter
Forum
Replies
Last Post
Honda_Fanatic
Mid-West (Sales)
13
Nov 28, 2007 08:12 PM
Honda_Fanatic
Classifieds: Forced Induction
6
Oct 26, 2007 07:01 PM
Honda_Fanatic
For Sale
5
Oct 25, 2007 08:23 PM
