96 integra gsr fs 2500
Thread Starter
Honda-Tech Member
Joined: Mar 2007
Posts: 473
Likes: 0
From: somewhere, wi, USA
96 integra gsr fs 2500
Selling my 96 gsr. Car will come with good pair of oem fenders and hood. Just needs paint though. I owned this car for 3 yrs and never had a problem. No CEL. Car located in Milwaukee, WI
Body
Mileage: 210,000
98 front conversion
amber corners
cypress green pearl
body condition 6/10
HID headlights
Motor:
Miles: Was told it rebuilt at 160k miles
Unknown headers from ebay
2.5 greddy sp2 pipings to stock muffler
cat converter has only about 5k on it
Tranny doesnt grind
Suspension:
Drop on unknown suspension ride quality is not shitty though
Energy bushing on sway bar
Lower Ball joints done not too long along
Skunk 2 proseries camber kits
Car comes with steelies
Inner tie rods down about 3k ago
Now for the bad
Motor does burn oil at vtec
Oil leaks from vtec solenoid
Needs rear rotors
Passenger back wheel bearing went out (car can still be driven though)
Some dings here and there
Overall the car has been good to me. Does still pull hard $2500 takes it. I have the black conversion interior i can throw in extra for a little more cash. You Will need just seats and carpets. This car has just been sitting for about a year now since the wheel bearing went out. Pm for any info
Body
Mileage: 210,000
98 front conversion
amber corners
cypress green pearl
body condition 6/10
HID headlights
Motor:
Miles: Was told it rebuilt at 160k miles
Unknown headers from ebay
2.5 greddy sp2 pipings to stock muffler
cat converter has only about 5k on it
Tranny doesnt grind
Suspension:
Drop on unknown suspension ride quality is not shitty though
Energy bushing on sway bar
Lower Ball joints done not too long along
Skunk 2 proseries camber kits
Car comes with steelies
Inner tie rods down about 3k ago
Now for the bad
Motor does burn oil at vtec
Oil leaks from vtec solenoid
Needs rear rotors
Passenger back wheel bearing went out (car can still be driven though)
Some dings here and there
Overall the car has been good to me. Does still pull hard $2500 takes it. I have the black conversion interior i can throw in extra for a little more cash. You Will need just seats and carpets. This car has just been sitting for about a year now since the wheel bearing went out. Pm for any info
Last edited by meng22; Jul 26, 2009 at 07:50 PM.
Trending Topics
Honda-Tech Member
Joined: May 2006
Posts: 1,339
Likes: 0
From: mil.wau.key
Thread Starter
Honda-Tech Member
Joined: Mar 2007
Posts: 473
Likes: 0
From: somewhere, wi, USA
Re: 96 integra gsr fs 2500
Honda-Tech Member
Joined: Feb 2004
Posts: 734
Likes: 0
From: MIDWEST
Re: 96 integra gsr fs 2500
OMFG.. For this price this car should already been gone.. Someone buy this guy's car. I seen LS rust bucket go for more this.. This is by far the cheapest GSR Integra on the Midwest forum..
Honda-Tech Member
Joined: Oct 2005
Posts: 1,424
Likes: 1
From: Waukesha, WI, USA
Re: 96 integra gsr fs 2500
Oh my god this is a redicious price, wish I had the money. Some buy my miata so I can roll in a teg............. http://www.hondamarketplace.com/show....php?t=2590489
Thread Starter
Honda-Tech Member
Joined: Mar 2007
Posts: 473
Likes: 0
From: somewhere, wi, USA
Re: 96 integra gsr fs 2500
Come on ppl wheel bearing and rotors w/ are not that expensive if u can fix by urself. Right now i just dont have money to fix it due to too many bills. Cheap GSR u can own.
Thread Starter
Honda-Tech Member
Joined: Mar 2007
Posts: 473
Likes: 0
From: somewhere, wi, USA
Re: 96 integra gsr fs 2500
i wouldnt advise any driving too far. Maybe somewhere 30-40 minutes away would be straight but i probably wouldnt push it. the rust isnt that bad. theres only rust on the passenger side. the drive side is good.