Assembly Lube or Oil for Freshly Hone Cylinder Walls?
Junior Member
Joined: May 2008
Posts: 305
Likes: 0
From: northwest 360ly
Re: Assembly Lube or Oil for Freshly Hone Cylinder Walls?
right after i honed my cylinder i imediatly wiped them down with gear oil on a rag.
if oil is not placed on the walls then they will rust very quickly.
when assembling use 30w
if oil is not placed on the walls then they will rust very quickly.
when assembling use 30w
Thread
Thread Starter
Forum
Replies
Last Post
