F/S Built B18B block for boost
Thread Starter
Honda-Tech Member
Joined: Nov 2002
Posts: 841
Likes: 0
From: chicago, il, usa
F/S Built B18B block for boost
For sale is my spare 95 b18b built bottom end with 9.0:1 comp JE pistons and Eagle H Beam rods bored out to 81.5 mm. I have had the block for bout a year and has NO miles on it. All the bearings are ACL. I have the same bottom end in my Type R and made over 400 whp on stock sleeves. Anything over that I would get them sleeved. If your goals are less than 400 whp than it should be fine. The machine work was done at Don's in Kenosha, They milled the block clean it up and matched the bore to the pistons that I gave them. Looking to get 800 obo.. I have over 1000 in the bottomend alone. Pm me ?s
Last edited by spooledex; Jun 4, 2009 at 05:17 AM.
Thread Starter
Honda-Tech Member
Joined: Nov 2002
Posts: 841
Likes: 0
From: chicago, il, usa
Re: F/S Built B18B block for boost
I built the block and file fit the rings to what the turbo specs where. 006 per inch. Torqued everything to specs already. just need to take off the oil pan for the oil drain and that's it. I didn't put it in because I didn't know if I was going to change manifolds or not. PM's replied.
Oh, its' just the short block, COMPLETE from head gasket to oil pan.. all pumps included.
Oh, its' just the short block, COMPLETE from head gasket to oil pan.. all pumps included.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Nov 2002
Posts: 841
Likes: 0
From: chicago, il, usa
Re: F/S Built B18B block for boost
I would ship it if you paid for all the shipping. I would make a wooden box for it. I sold one last year and it cost me 120 to ship it. Was about 140 pounds all together.
Honda-Tech Member
Joined: Jul 2005
Posts: 1,687
Likes: 0
From: 630, IL, USA
Re: F/S Built B18B block for boost
send pics to johnsi99@msn.com. I have someone that might buy my h22 so i can prolly scoop this up
