Love Vtec? Super mega B series part out!!!!! endyn hytech hondata rc you want i got
Thread Starter
Honda-Tech Member
Joined: Jun 2007
Posts: 424
Likes: 0
From: San Luis Obispo, CA
Love Vtec? Super mega B series part out!!!!! endyn hytech hondata rc you want i got
Well i was going to part out my JDM 92 Si-R but decided to keep the car but go to a v6 possibly, well anyways here is what i have for sale, i am located in norther california and will ship all items.
contact - ysbeg6@vzw.blackberry.com, Senseilogan@suddenlink.net, or call me 707 834 2301 (if i do not pic up i will call you back)
here is a list, i will post pics later but if you are interested i will email them to you asap.
Endyn built Head, was originally an ITR , just done two months ago, has maybe 1000 miles on rebuild. ( endyn full port job, cold welded quench pads, polished, all new valve seals, seats, guides. Endyn nitrite coated valves, Endyn dual valve springs good to 10k endyn ti retainers. new owm LMA's ) comes with vtec selinoid
*****asking 2000***** i paid over 3500 for this .
98 ITR tranny Built by syncrotech aka gearspeed. this is hands down the best tranny you can get for all motor ( ITR 1-4th gear LS 5th, quiffe LSD with lifetime warrenty, carbon coated syncros, all new sleaves, new bearings, 4.9 final drive, semi polished case)
to have this tranny built will cost 4k + not including a core.
****asking 2800***
Hytech header ---600
hytech exhaust EG6--500
RC 440's ---sold local
Golden eagle fuel rail -100
Full race Pro Am traction bar-350
endyn ported intake mani - 300
edlebrock 65mm TB. - sold to phantomgoat
endyn breather tank with block plugs-150
S2R titanium cam gears-150
endyn bumpstixx cams -400
Hondata s300 socketed into a JDM P72 -550
PLX devices wideband with sensor stock 0-1v and 0-5 for wideband-300
NOS Dry kit with 10Lb bottle-350
DSS level 2.9 axles -500
compition clutch level 3 used 2000 miles with flywheel -350
ARP head studs-100
Eagle rods gsr stroke-offer
Darton sleeved GSR block (needs rebore) currently 84.5mm will work great for a 85mm build- 800 with cam caps and gsr gridle.
have more will post up tonight.
if you have any question just drop me a pm or email or give me a call!
contact - ysbeg6@vzw.blackberry.com, Senseilogan@suddenlink.net, or call me 707 834 2301 (if i do not pic up i will call you back)
here is a list, i will post pics later but if you are interested i will email them to you asap.
Endyn built Head, was originally an ITR , just done two months ago, has maybe 1000 miles on rebuild. ( endyn full port job, cold welded quench pads, polished, all new valve seals, seats, guides. Endyn nitrite coated valves, Endyn dual valve springs good to 10k endyn ti retainers. new owm LMA's ) comes with vtec selinoid
*****asking 2000***** i paid over 3500 for this .
98 ITR tranny Built by syncrotech aka gearspeed. this is hands down the best tranny you can get for all motor ( ITR 1-4th gear LS 5th, quiffe LSD with lifetime warrenty, carbon coated syncros, all new sleaves, new bearings, 4.9 final drive, semi polished case)
to have this tranny built will cost 4k + not including a core.
****asking 2800***
Hytech header ---600
hytech exhaust EG6--500
RC 440's ---sold local
Golden eagle fuel rail -100
Full race Pro Am traction bar-350
endyn ported intake mani - 300
edlebrock 65mm TB. - sold to phantomgoat
endyn breather tank with block plugs-150
S2R titanium cam gears-150
endyn bumpstixx cams -400
Hondata s300 socketed into a JDM P72 -550
PLX devices wideband with sensor stock 0-1v and 0-5 for wideband-300
NOS Dry kit with 10Lb bottle-350
DSS level 2.9 axles -500
compition clutch level 3 used 2000 miles with flywheel -350
ARP head studs-100
Eagle rods gsr stroke-offer
Darton sleeved GSR block (needs rebore) currently 84.5mm will work great for a 85mm build- 800 with cam caps and gsr gridle.
have more will post up tonight.
if you have any question just drop me a pm or email or give me a call!
Last edited by P12 EG6; Jun 1, 2009 at 05:35 AM.
good stuff
