I am looking for someone that can help me make an exhaust manifold for my MR2 project. It is a basic design, but the cuts are too complex for me to even try to tackle with my limited tools and with the way they merge together at the collector. I am in Newport News, VA for reference. If anyone is willing and capable to do this, please let me know. Here is a thrown together pic of what it should look like:



Everything except the head flange is stainless. The head flange is mild steel. I have got to get this done, so any help, or contact info for someone that can do it, is appreciated.

I know it might be hard to see with my pic, but it would be like this one, but a LOT more compact and the runners obviously spread apart more, but the flat design is what I am looking for, so I guess 4 into 1 flat style :



Total measurement from head side of head flange to turbo side of turbo flange must not exceed about 6". I tested the measurements using the (4) 90s and the (4) 45s shown in the pic, and it worked out almost perfect, but I have no way to cut these things or weld them.

Also, if any online places can do it using my materials, let me know as well. Thanks!