A few questions regarding wiring up VTEC with a DX harness!!
Thread Starter
Honda-Tech Member
Joined: Aug 2007
Posts: 6,495
Likes: 3
From: Pomona, CA
A few questions regarding wiring up VTEC with a DX harness!!
Hey all...
I have a 99 DX and I added a 98 D16Y8.
I have an '00 P2P ECU (Wannabe you kick *** bruh) and my DX harness. I already made wires for the VTEC solenoid and the oil pressure switch.
How do I move the pins as its stated in the following pictures?
http://www.ff-squad.com/tech/wiring/wiring.99-01.jpg
http://www.ff-squad.com/tech/wiring/...-01_b-plug.jpg
Can I ADD pins to the VTEC and Oil Press. wires so I can connect them to the harness plugs?
I have a 99 DX and I added a 98 D16Y8.
I have an '00 P2P ECU (Wannabe you kick *** bruh) and my DX harness. I already made wires for the VTEC solenoid and the oil pressure switch.
How do I move the pins as its stated in the following pictures?
http://www.ff-squad.com/tech/wiring/wiring.99-01.jpg
http://www.ff-squad.com/tech/wiring/...-01_b-plug.jpg
Can I ADD pins to the VTEC and Oil Press. wires so I can connect them to the harness plugs?
Thread
Thread Starter
Forum
Replies
Last Post
