So I was putting in some new plugs. I was on the last one and while I was tightening it, I heard a snap. Tried to take it out, but some how the threaded part and the electrode broke off and is stuck down there. There's no solid piece that I can use an ez out on, so I have no damn idea how to take it out.





The part that is outlined in red:

 

take the head off I cant think of anything else

 

i used a screw exreactor with a socket and extension....worked great
http://www.rettigs.com/catalog/Cutti...Extractor.html
hope that helps...

 

What size?

 

just do it right and take the head off.

 

dont remeber right off the top of my head..take the plug and look for one that would fit sung right about the half way mark..
Ive done this twice on 2 different customers cars...both integras

 

Anyway you can find out? If not, I'll be heading to store tomorrow and see what I can find.

 

u need to use anti-seize next time and dont over torque them.

 

yea a screw extractor is a cheap way to go but taking off the head is better.

 

It's not my car, but yeah he does!

 

Same thing happened to me bro, i whent to autozone and bought the ez-out tool set.
20$ fix, make sure you spray some wd40 on the broken part of the spark plug.

a lil smoke will come out your exhaust on start up so dont worry.

 

Only a screw extractor will work here I think since it's hollow. I just cut apart an extra spark plug to take to the store tomorrow to find the right size.

This is pretty much what's stuck in there still:

 

that how the ones i took out looked...