ok, i'll try to keep this short. My car was acting up about a week ago and bogging down very bad. then last weekend just completely died on me. I brought it home pulled the code and it gave me a vtec solenoid defective (i originally thought distributor). i pulled and cleaned it. I then went ahead and checked the spark. No spark at all... so i checked the coil, it passed. I checked the igniter, it failed, so i replaced it thinking that was the problem. Still no spark, so i checked out the dist. cap and it had carbon on all the prongs for the plug wires. So i replaced it... still not spark! is there any thing i'm overlooking?

thank you

 

bump

 

i had the same issue, make sure you check the dissy, and the connection wire for it also , i found out my was loose

 

i have changed the igniter and checked the coil in the distributor... i'm missing something somwhere though...