------- Chicago & Illinois FS/FT/WTB May2009
i have some ctr cams for sale and a dry nos nitrous kit...make an offer
i have a 66mm throttle body, i need to double check on the size.
wtb coilovers and i will trade for the parts listed above.
testing waters....
b20vtec 1995 eg hatch
gsr head
skunk2 stage 2 cams
skuck 2 cam gears
skunk 2 springs and retainers
ferea valves
golden eagle valve guides
310cc rc injectors
blox fuel regulator
blox intake manifold
blox throttlebody
golden eagle ls/vtec conversion kit
4-1 headers
msd ign box and coil
ngk plugs
eyden oil catchcan
JE 12-5-1 pistons and rings
goldeneagle crank support
act stage 1 clutch
crome ecu
no rust
car was dyno tuned at 190 to the wheels on a low reading dyno.
i might be missing some things.
thanks
773-562-3825
i have a 66mm throttle body, i need to double check on the size.
wtb coilovers and i will trade for the parts listed above.
testing waters....
b20vtec 1995 eg hatch
gsr head
skunk2 stage 2 cams
skuck 2 cam gears
skunk 2 springs and retainers
ferea valves
golden eagle valve guides
310cc rc injectors
blox fuel regulator
blox intake manifold
blox throttlebody
golden eagle ls/vtec conversion kit
4-1 headers
msd ign box and coil
ngk plugs
eyden oil catchcan
JE 12-5-1 pistons and rings
goldeneagle crank support
act stage 1 clutch
crome ecu
no rust
car was dyno tuned at 190 to the wheels on a low reading dyno.
i might be missing some things.
thanks
773-562-3825
i have a 1992 nissan 240sx 5-speed coupe.has a spun rod bearing so the car dosent run. in the rear brakes it has all new steel brake lines,rubber brake hoses, new calipers,new rotors and new pads.has 3 newer tires. 1 needs to be replaced. the dash and inside panels are super clean, no crack or anything.
Im wanting to trade it for a 92-95 civic hatch or coupe but must be 5-speed.
or if your interested shoot me an offer.
Im wanting to trade it for a 92-95 civic hatch or coupe but must be 5-speed.
or if your interested shoot me an offer.
Trending Topics
sup fockers. i am lookin for a y8 manifold WITHOUT THE IACV on the back and no AIR injection holes for my 99 y7. lookin to get one with the tb and fittings and tb cable stay with it already.
FS:
Rcautoworks log manifold
sc6152e with v-band
Rcautoworks 3inch v-band downpipe (wrapped) with flex pipe
Rcautoworks dumptube
All SS piping
less then 10k miles on everything
Setup was on an LS motor in a DA and fit awesome. turned my motor back to stock . need to sell
$1,000 obo PM for more details/photo's
Rcautoworks log manifold
sc6152e with v-band
Rcautoworks 3inch v-band downpipe (wrapped) with flex pipe
Rcautoworks dumptube
All SS piping
less then 10k miles on everything
Setup was on an LS motor in a DA and fit awesome. turned my motor back to stock . need to sell
$1,000 obo PM for more details/photo's
Parting out ::::::::: I'm parting out a 97 coupe ex black in color let me know what you need and i might have it ...97 b16 bare head with port job best offer for the rite price will throw in jdm type r valves ,dual spring and brand new supertech retainers ....
TW:
DA Integra Front Brakes, pretty clean. I have both sides just one pictured
Has newer Brembo Blank Rotors and Hawk HPS pads plus rebuilt Nissin calipers. Also has ARP extended wheel studs.
$150 firm
90-91 civic sedan EX master cylinder 15/16
$50
plus check my sig for my for sale thread for other parts
DA Integra Front Brakes, pretty clean. I have both sides just one pictured
Has newer Brembo Blank Rotors and Hawk HPS pads plus rebuilt Nissin calipers. Also has ARP extended wheel studs.
$150 firm
90-91 civic sedan EX master cylinder 15/16
$50
plus check my sig for my for sale thread for other parts
wtb jdm itr wheels! 4x114.3 let me know
also any prelude parts
jdm headlights i really need just the driver side but let me know maybe ill bite
also any prelude parts
jdm headlights i really need just the driver side but let me know maybe ill bite
FS: Mint ITR OEM Gunmetal wheels. near the U of C. with crappy oem GSR tires (don't ask me why). $500 picked up OBO. send me an email at vse0 @yahoo.com all offers welcome! must sell!!!!
FS:
14" 4x100 Steelies from an EK, 3 without tires, 1 with a 185/65/14 almost new - $35
Bare D16Y7 Intake Manifold and throttle body - $10
D16Y7 head everything but valve cover $35
D16Y7/8 Fuel Rail - $10
96-98 Automatic EX ECU's - Have 2 - $40 each
14" 4x100 Steelies from an EK, 3 without tires, 1 with a 185/65/14 almost new - $35
Bare D16Y7 Intake Manifold and throttle body - $10
D16Y7 head everything but valve cover $35
D16Y7/8 Fuel Rail - $10
96-98 Automatic EX ECU's - Have 2 - $40 each
FS: Super Rare JDM B20 P8R head $250
FS: JDM DB8 4door Integra Type R Spoiler $120
some scartches and scuffs but no cracks nor hole
FS: JDM DC2 2door Integra Type R Rear Seats $120
top part of the seat has some sun fade but bottom part is perfect
FS: JDM DB8 4door Integra Type R Spoiler $120
some scartches and scuffs but no cracks nor hole
FS: JDM DC2 2door Integra Type R Rear Seats $120
top part of the seat has some sun fade but bottom part is perfect



