jdm front suggestions?
I'm in the market to buy a Japanese front end within the next week. Can anyone suggest a good reputable place to buy one from? Checked with password and their pretty expensive and possibly my last resort, eBay has some but I'm kinda leery about buying a complete front end from someone on eBay. Thanks in advance
BTW, here is the link to the eBay front. http://cgi.ebay.com/ebaymotors/JDM-I...Q5fAccessories
BTW, here is the link to the eBay front. http://cgi.ebay.com/ebaymotors/JDM-I...Q5fAccessories
Last edited by dc4_wHORE; Apr 24, 2009 at 03:11 PM.
JDM fronts are over rated in my opinion, I say don't get it because you need to run the JDM rad. support, this will make your car weaker in the front...But it's your choice!
Thanks for the input.
Being that the frame of a jdm integra is the same and a usdm simply the core support is changed to accomidate the different front bumper, hood, and headlights. The only way i could see swaping the core support as weakening the frame is if it is not done rite or the core support has been previously damaged. Also the core support has very little stuctual integrity and plays a small small part in supporting anything other than the rad. core. But please if im wrong correct me with some evidence of this claim.
Trending Topics
I'm in the market to buy a Japanese front end within the next week. Can anyone suggest a good reputable place to buy one from? Checked with password and their pretty expensive and possibly my last resort, eBay has some but I'm kinda leery about buying a complete front end from someone on eBay. Thanks in advance
BTW, here is the link to the eBay front. http://cgi.ebay.com/ebaymotors/JDM-I...Q5fAccessories
BTW, here is the link to the eBay front. http://cgi.ebay.com/ebaymotors/JDM-I...Q5fAccessories
Wanted to get a cut in his buisness as well but 2k buyin too much for me for the moment...
some of the canadian sellers have been dumping these around 1000 shipped for an sir-g or 1200 for ITR. only the HID fronts have been holding at or sometimes above 1500 shipped.
the seller you posted also seems like a great place to go. he's competitive with prices and offers help if you need it with the install. when i was considering a jdm front he is one of the people that i most likely would have bought from. then a 98+ conversion turned up with great OEM lights for $250
the seller you posted also seems like a great place to go. he's competitive with prices and offers help if you need it with the install. when i was considering a jdm front he is one of the people that i most likely would have bought from. then a 98+ conversion turned up with great OEM lights for $250
Joined: Apr 2005
Posts: 5,343
Likes: 0
From: Los Angeles.
I'd like to hear an explanation of this claim, maybe some evidence!
Being that the frame of a jdm integra is the same and a usdm simply the core support is changed to accomidate the different front bumper, hood, and headlights. The only way i could see swaping the core support as weakening the frame is if it is not done rite or the core support has been previously damaged. Also the core support has very little stuctual integrity and plays a small small part in supporting anything other than the rad. core. But please if im wrong correct me with some evidence of this claim.
Being that the frame of a jdm integra is the same and a usdm simply the core support is changed to accomidate the different front bumper, hood, and headlights. The only way i could see swaping the core support as weakening the frame is if it is not done rite or the core support has been previously damaged. Also the core support has very little stuctual integrity and plays a small small part in supporting anything other than the rad. core. But please if im wrong correct me with some evidence of this claim.
Maybe he was thinking of the bumper extension, which is really just a pole compared to the USDM thick impact beam.
Thanks everyone for the input. The seller seems legit, i tried to check out his profile and everything seems normal. I think the only way the jdm front support would be weaker is if you bolt it up instead of weld it in place of the existing usdm support.
i really appreciate all the input, this is a huge purchase for me to make to someone i've never even met before.. hope everything goes good.
i really appreciate all the input, this is a huge purchase for me to make to someone i've never even met before.. hope everything goes good.
https://honda-tech.com/forums/showth...ight=b0mb3rm2n
Thats the only thread I can find, I remember reading bout him a few years back when I was in the market for a front end.
I would do it. I just got mines installed for $1450 with CW w/ JDM OEM lip. Cut and T-welded. Although I have to say the front radiator supports seams to be weak. I say that because it flexes when I put little to no force with the palm of my hand which came to a surprise.
https://honda-tech.com/forums/showth...ight=b0mb3rm2n
Thats the only thread I can find, I remember reading bout him a few years back when I was in the market for a front end.
Thats the only thread I can find, I remember reading bout him a few years back when I was in the market for a front end.
Honda-Tech Member
Joined: Feb 2009
Posts: 207
Likes: 0
From: NORCAL Salinas Valley to Monterey Bay Area 831 CA
I believe you guys are reffering to Kenny (the seller from ebay). I did business with him a year ago. I got a complete front end from him. I was willing to drive all the way to Santa Ana, Ca. (were he lives) to get it installed for a pretty good deal. He's legit. NO FAKE PARTS!
Thread
Thread Starter
Forum
Replies
Last Post





