FS-$2400-B18C1 Long Block:Buddy Club, Edelbrock, RS Machine, BDL, Supertech
Thread Starter
Honda-Tech Member
Joined: Nov 2006
Posts: 2,531
Likes: 0
From: Santa Cruz, CA
FS-$2400-B18C1 Long Block:Buddy Club, Edelbrock, RS Machine, BDL, Supertech
NEW PICTURES ADDED
PRICE LOWERED
For Sale B18C1 Built Long Block 3000$
Email: Clemkevin@gmail.com
Phone: 949-290-4142
AIM: soflexyourhead.
Built by myself in our wonderful machine shop at saddleback college. Thanks to the helpful words of Mike Laskey, Bob Mckray of Mission Viejo and a couple other knowledgable people I was able to overcome the difficulty of building a honda in a primarily big block building classroom. Unfortunately I decided I was willing to sacrfice and sell this motor so my mom could by my little brother a car, as the motor was built with her money. I spent more than 3500$ to get this motor together, but I just want to make this a good thrifty sale. If you have any questions at all feel free to ask, if you feel I've missed something don't be afraid to point it out.
The calculated compression was somewhere in the 11.6:1 area.
Head:
Edelbrock Performer X manifold
Stock Throttle Body
Hondata Intake Manifold Gasket
Port matched
Buddyclub 3+ cams
BDL adjustable cam gears
Brian Crower Steel Retainers
Supertech Dual Valve Springs
New valve seals
Bronze valve guides
OEM Intake and Exhaust valves
-All valves were given 45 and 30 degree back cuts.
3 angle valve job in/ex 60/45/40
Shaved .002"
-No fuel system or TB sensors
Block
Stock head gasket
Decked .014
Bored to 82mm
Honed
ARP Head Studs
RS Machine US Integra Type R pistons
-.0015" Piston to wall clearance
Balanced stock rods
ACL rod bearings (plastigauged, clearance good.)
Balanced and micropolished stock crankshaft
ACL main bearings (also plastigauged, clearance good.)
ITR crank pulley
OEM oil cooler
Profab header modified to accept donut gasket (optional, price is negotiable)
-No alternator or A/C available
I will also include 5 quarts of Joe Gibbs Break In Oil for free with this, a cost of $50+. I can also include the old valvetrain and extra valves if you need. I think i have 5 intake and 5 exhaust valves that were not needed.
I can get more pictures of the engine later. Still Performing Final Assembly.
PRICE LOWERED
For Sale B18C1 Built Long Block 3000$
Email: Clemkevin@gmail.com
Phone: 949-290-4142
AIM: soflexyourhead.
Built by myself in our wonderful machine shop at saddleback college. Thanks to the helpful words of Mike Laskey, Bob Mckray of Mission Viejo and a couple other knowledgable people I was able to overcome the difficulty of building a honda in a primarily big block building classroom. Unfortunately I decided I was willing to sacrfice and sell this motor so my mom could by my little brother a car, as the motor was built with her money. I spent more than 3500$ to get this motor together, but I just want to make this a good thrifty sale. If you have any questions at all feel free to ask, if you feel I've missed something don't be afraid to point it out.
The calculated compression was somewhere in the 11.6:1 area.
Head:
Edelbrock Performer X manifold
Stock Throttle Body
Hondata Intake Manifold Gasket
Port matched
Buddyclub 3+ cams
BDL adjustable cam gears
Brian Crower Steel Retainers
Supertech Dual Valve Springs
New valve seals
Bronze valve guides
OEM Intake and Exhaust valves
-All valves were given 45 and 30 degree back cuts.
3 angle valve job in/ex 60/45/40
Shaved .002"
-No fuel system or TB sensors
Block
Stock head gasket
Decked .014
Bored to 82mm
Honed
ARP Head Studs
RS Machine US Integra Type R pistons
-.0015" Piston to wall clearance
Balanced stock rods
ACL rod bearings (plastigauged, clearance good.)
Balanced and micropolished stock crankshaft
ACL main bearings (also plastigauged, clearance good.)
ITR crank pulley
OEM oil cooler
Profab header modified to accept donut gasket (optional, price is negotiable)
-No alternator or A/C available
I will also include 5 quarts of Joe Gibbs Break In Oil for free with this, a cost of $50+. I can also include the old valvetrain and extra valves if you need. I think i have 5 intake and 5 exhaust valves that were not needed.
I can get more pictures of the engine later. Still Performing Final Assembly.
Last edited by r.wright; Jun 30, 2009 at 01:22 PM.
![Black-Ty [EG6]'s Avatar](https://honda-tech.com/forums/customavatars/avatar999547556_3.gif){kind=avatar}
Trending Topics
Honda-Tech Member
iTrader: (1)
Joined: Oct 2005
Posts: 9,716
Likes: 3
From: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
Re: For Sale B18C1 Built Long Block 3500$ (no negotiating on price)
Bump for kevin, Please don't tell me your lil bro wrecked the teg?... oyea, when can I come out and party with you hottttttt neighbor gurls!!!!!!!!!!!!!!!!!!!!!!!!!
Thread Starter
Honda-Tech Member
Joined: Nov 2006
Posts: 2,531
Likes: 0
From: Santa Cruz, CA
Re: For Sale B18C1 Built Long Block 3500$ (no negotiating on price)
were just an integra family i guess?
My little brother is severely depressed because of our family issues, so i offered to give my brother my car and my mom would give me the money i sell the motor for to buy another
Thread Starter
Honda-Tech Member
Joined: Nov 2006
Posts: 2,531
Likes: 0
From: Santa Cruz, CA
Honda-Tech Member
Joined: Apr 2008
Posts: 2,679
Likes: 0
From: hb area RIGHT NEAR THE BEEEEEEaCH, ca, usa
Re: For Sale B18C1 Built Long Block 3500$ (no negotiating on price)
what the price range? cuz imoa start hella low =P
lmk cuz i need one bad mine blown. help a bro out
lmk cuz i need one bad mine blown. help a bro out
Thread Starter
Honda-Tech Member
Joined: Nov 2006
Posts: 2,531
Likes: 0
From: Santa Cruz, CA