Cleaning out my Garage: B Series Turbo Goods, DC Integra Parts etc. DELAWARE
Thread Starter
Honda-Tech Member
Joined: Mar 2006
Posts: 6,381
Likes: 0
From: Newark, DE
Cleaning out my Garage: B Series Turbo Goods, DC Integra Parts etc. DELAWARE
I dont have Paypal! Prefer Local Pickup, I can also meet at the DE/MD, DE/NJ or DE/PA border for all parts.
Partial Turbo Kit Willing to sell Manifold, DP and dumptube seperate as a package I prefer local pickup on my items, that way there is no discrepency into the quality of the parts, I live 45min South of Philly
Kit:
Neukin qp Ramhorn Manifold, T3 Flanged for Tial 44mm V-Band Wastegate -
3" Stainless Full Length Downpipe, no need for a test pipe, 2 02 bungs welded on, 4bolt GT Flange (includes stainess Allen Head Hardware) -
1.75" Stainless Dumptube for Wastegate
2.5" AFI Aluminum Charge Pipes (made for S cover turbo and VictorX on a GSR Head using this manny)
Manifold, DP and Dumptube and Chargepipes for $650 <---- dropped over $225 7/29
Golden Eagle Sleeved GSR Block, currently sits at 81.5mm. Deck is nice and straight and comes with a GSR Crank still installed on good ACL Bearings, and a Toga HP oil pump with 3000 miles on it, 3000 miles also on the main bearings and seals etc, just need to install pistons and rods and go. $700 Firm
Custom S&W Racecars 8pt Cromoly Roll Bar: Brand New, has added X for the rear bars and an extra 8' Length of Moly to do w/e you want with, comes with the 1/8 MS plates for the floor as well: $400 firm
2.5" AFI Aluminum Intercooler Piping (needs new flange for your BOV of choice) $100
3" Thermal R&D Exhaust for DC Integra $400 Firm
AEM Underdrive Power Steering Pulley & Pump: Silver $50obo
Integra DC Hood, dent free and primed ready for paint $125 Firm
Integra DC Fenders, great condition and primed ready for paint $200 takes them both or $300 w/ hood
Working Integra DC Sunroof Assembly: Complete removed from my car to
install Carbon Roof $50
AEM 3 Bolt Cam Gears $50
Dark Blue Integra DC Seats: Good Condition, both passenger and driver $125ea obo
Simpson Platinum Camlock 6pt Harness, Brand new never used but dates expired $100
I will update as I find more stuff laying around, I prefer not to ship I would rather meet in person.
Partial Kit with 2.5" AFI Piping
AEM PS Pulley (working pump included)
3" Thermal for DC
EF CRX SI Seats: Passenger side is minty fresh, Drivers side has a few burn holes but overall looks good SOLD
Walbro 255hp Inline Booster Pump: 1500miles comes with AN -6 Fittings on both ends SOLD
RC1000's w/ Resistor Box: SOLD
AEM Pressure Reg: SOLD
AEM Fuel Rail: Silver: SOLD
Tial 44mm Wastegate w/ 13psi Spring - SOLD
Integra GSR Cams: Good Condition, great for Boost! SOLD
EF to B-Series Engine Harness: SOLD
OEM ITR Front Lip, Primed ready for paint: SOLD
Clean Momo Trek Steering Wheel and Hub for an EF: SOLD
AEM 3.5 BAR MAP SENSOR (reads to 36psi): Comes with pigtail harness: SOLD
2000 USDM ITR Front Bumper: SOLD
98-01 Headlights: SOLD
Partial Turbo Kit Willing to sell Manifold, DP and dumptube seperate as a package I prefer local pickup on my items, that way there is no discrepency into the quality of the parts, I live 45min South of Philly
Kit:
Neukin qp Ramhorn Manifold, T3 Flanged for Tial 44mm V-Band Wastegate -
3" Stainless Full Length Downpipe, no need for a test pipe, 2 02 bungs welded on, 4bolt GT Flange (includes stainess Allen Head Hardware) -
1.75" Stainless Dumptube for Wastegate
2.5" AFI Aluminum Charge Pipes (made for S cover turbo and VictorX on a GSR Head using this manny)
Manifold, DP and Dumptube and Chargepipes for $650 <---- dropped over $225 7/29
Golden Eagle Sleeved GSR Block, currently sits at 81.5mm. Deck is nice and straight and comes with a GSR Crank still installed on good ACL Bearings, and a Toga HP oil pump with 3000 miles on it, 3000 miles also on the main bearings and seals etc, just need to install pistons and rods and go. $700 Firm
Custom S&W Racecars 8pt Cromoly Roll Bar: Brand New, has added X for the rear bars and an extra 8' Length of Moly to do w/e you want with, comes with the 1/8 MS plates for the floor as well: $400 firm
2.5" AFI Aluminum Intercooler Piping (needs new flange for your BOV of choice) $100
3" Thermal R&D Exhaust for DC Integra $400 Firm
AEM Underdrive Power Steering Pulley & Pump: Silver $50obo
Integra DC Hood, dent free and primed ready for paint $125 Firm
Integra DC Fenders, great condition and primed ready for paint $200 takes them both or $300 w/ hood
Working Integra DC Sunroof Assembly: Complete removed from my car to
install Carbon Roof $50
AEM 3 Bolt Cam Gears $50
Dark Blue Integra DC Seats: Good Condition, both passenger and driver $125ea obo
Simpson Platinum Camlock 6pt Harness, Brand new never used but dates expired $100
I will update as I find more stuff laying around, I prefer not to ship I would rather meet in person.
Partial Kit with 2.5" AFI Piping
AEM PS Pulley (working pump included)
3" Thermal for DC
EF CRX SI Seats: Passenger side is minty fresh, Drivers side has a few burn holes but overall looks good SOLD
Walbro 255hp Inline Booster Pump: 1500miles comes with AN -6 Fittings on both ends SOLD
RC1000's w/ Resistor Box: SOLD
AEM Pressure Reg: SOLD
AEM Fuel Rail: Silver: SOLD
Tial 44mm Wastegate w/ 13psi Spring - SOLD
Integra GSR Cams: Good Condition, great for Boost! SOLD
EF to B-Series Engine Harness: SOLD
OEM ITR Front Lip, Primed ready for paint: SOLD
Clean Momo Trek Steering Wheel and Hub for an EF: SOLD
AEM 3.5 BAR MAP SENSOR (reads to 36psi): Comes with pigtail harness: SOLD
2000 USDM ITR Front Bumper: SOLD
98-01 Headlights: SOLD
Last edited by 96 GSR-T; Jul 29, 2009 at 06:37 AM. Reason: edited
Honda-Tech Member
Joined: Jun 2006
Posts: 1,727
Likes: 0
From: Brick, NJ, usa
Re: Cleaning out my Garage: B Series Turbo Goods, DC Integra Parts etc. DELAWARE
got pics of the skunk2 drag coilovers email to b18pwdcivic@aol.com
Thread Starter
Honda-Tech Member
Joined: Mar 2006
Posts: 6,381
Likes: 0
From: Newark, DE
Re: Cleaning out my Garage: B Series Turbo Goods, DC Integra Parts etc. DELAWARE
Bump
Sorry decided to keep these for now, forgot I have nothing to put back on the car at the moment
got pics of the skunk2 drag coilovers email to b18pwdcivic@aol.com
Sorry decided to keep these for now, forgot I have nothing to put back on the car at the moment
Thread Starter
Honda-Tech Member
Joined: Mar 2006
Posts: 6,381
Likes: 0
From: Newark, DE
