hey guys im putting some blox lower control arms on my 98 civic hb with a pair of tokico blues. my question:is there supposed to be a big gap in between the bushing and the strut fork? like on the other bushings(for the crossmember and the one that goes to the trailing arm i think) the struts fits in perfect. but on the bushing for the strut it looks smaller and has a gap that tightening the bolt on the strut wont fill the remainder. it looks like im gonna have to put washers in between.

any suggestions would greatly help. maybe they put the wrong bushing in idk.

pics will be up later.

 

are you sure the struts arent universal for 92-00 cause 92-95 LCA's have a wider bushing and strut companys make the struts fit all years so ya just add the spacers i think they are 1/8-3/16 of an inch each.

 

ya when i bought the tokicos it said 92-00 civic and the lca said 96-00. ya ur prob. right abuot adding washers.

 

92-00, the rear shocks arent the same but can fit with modification, 92-95 rears on 96-00 will by adding washers