I attempted to log wideband from a gen 1 DIY setup that works fine with Crome. I used the D14 input and then inputed the values but the information didn't seem correct. Also, under O2 in the left sensor log it's showing output voltage not a/f conversion.

Any help anyone can lend? Just not familiar with this setup that's necessary.

Just want to be sure everything is logging properly and all is good. Still doing alot of reading on datalogging and whatnot to become more familiar with the software.

 

It should be connected similarly to this: http://www.hondata.com/techplxwiring.html