Tw: Ek Hatch.|.h22.|.srr.|.rays.|.ctr
Puttin the Hatch up just to see what i can get... Im in no hurry to sell or trade... ANY QUESTIONS FEEL FREE TO ASK
TRADE: entertain me
SELL: 7500 OBO
Year: 1996
Make: Honda
Model: Civic DX
Shell has over 13x,xxx
Engine Bay:
. 1994 USDM H22A1 motor has 99,376 Miles (i put exactly 2,254 miles since i put the swap in)
. Replaced the following with OEM HONDA PARTS before i put in the swap:
timing belt, balancer belt, water pump, front and rear main seal, auto tensioner, oil pan gasket, cam seals, oil cooler gasket, dizzy o-ring, BLOX cam cap, vtec sil gasket, vc gasket with spark plug gaskets, spark plugs and wires,dizzy cap and alternator belt
(THERE ARE NO LEAKS ANYWHERE)
. Mild wire tuck
. ITR strut bar (not installed)
. Edelbrock Oil cap
. AEM cold air intake
. B&M Fuel pressure regulator
. Hondata intake gasket (not installed)
. H22 tranny (no grinds)
. 8.2 lb Fidanza light-weight Flywheel
. Baycity 4 puck sprung dual friction clutch with new OEM pressure plate
. AVID motor mounts
. Chipped p28 with an H22 Basemap
. NO CHECK ENGINE CODES
. exhaust is a custom 2.5 in piping with a turn down just before the rear control arm....it has a Thrust glassback resanator welded in between the piping
Interior:
. CTR cluster, Shift boot, and Center Console
. SI steering wheel and Armrest
. White ITR style shift ****
. ITR floormats
. S2k Seats
. SRR Switch panel, pedals with dead pedal
. Kenwood radio
. 4 6.5in PIONEER speakers
. Ipod hook-up
. Power windows
. Power locks
Exterior:
. 99-00 Civic SI front
. 99-00 Taillights
. CTR style rear lip
. Carbon fiber spoiler (needs to be recleared)
. SRR Quick bumper releases and Hatch Latches
. Spoon style mirrors
. OEM RayBrig foglights
Suspension:
. PIC Apex for 96-00 EK
. SRR purple rear lower control arms
. Volk SE37 15x7 (refinished by TRANCEOLOGIST)
. Federal 195-50-15 performance tires
. Rays Lug nuts and Valve stems
I plan to put the AC in just need a slim fan and custom bracket for the compressor to make it all work.. i have all the original parts for the AC from the hatch.... also i have integra front and rear disk brakes that just need rotors and pads before i can put them on... i plan to have this in within the next couple of weeks if i still have the hatch...
on with the PICS.......

.

.

.

.

.

.

.

.

.

.

.

.

.

.
TRADE: entertain me
SELL: 7500 OBO
Year: 1996
Make: Honda
Model: Civic DX
Shell has over 13x,xxx
Engine Bay:
. 1994 USDM H22A1 motor has 99,376 Miles (i put exactly 2,254 miles since i put the swap in)
. Replaced the following with OEM HONDA PARTS before i put in the swap:
timing belt, balancer belt, water pump, front and rear main seal, auto tensioner, oil pan gasket, cam seals, oil cooler gasket, dizzy o-ring, BLOX cam cap, vtec sil gasket, vc gasket with spark plug gaskets, spark plugs and wires,dizzy cap and alternator belt
(THERE ARE NO LEAKS ANYWHERE)
. Mild wire tuck
. ITR strut bar (not installed)
. Edelbrock Oil cap
. AEM cold air intake
. B&M Fuel pressure regulator
. Hondata intake gasket (not installed)
. H22 tranny (no grinds)
. 8.2 lb Fidanza light-weight Flywheel
. Baycity 4 puck sprung dual friction clutch with new OEM pressure plate
. AVID motor mounts
. Chipped p28 with an H22 Basemap
. NO CHECK ENGINE CODES
. exhaust is a custom 2.5 in piping with a turn down just before the rear control arm....it has a Thrust glassback resanator welded in between the piping
Interior:
. CTR cluster, Shift boot, and Center Console
. SI steering wheel and Armrest
. White ITR style shift ****
. ITR floormats
. S2k Seats
. SRR Switch panel, pedals with dead pedal
. Kenwood radio
. 4 6.5in PIONEER speakers
. Ipod hook-up
. Power windows
. Power locks
Exterior:
. 99-00 Civic SI front
. 99-00 Taillights
. CTR style rear lip
. Carbon fiber spoiler (needs to be recleared)
. SRR Quick bumper releases and Hatch Latches
. Spoon style mirrors
. OEM RayBrig foglights
Suspension:
. PIC Apex for 96-00 EK
. SRR purple rear lower control arms
. Volk SE37 15x7 (refinished by TRANCEOLOGIST)
. Federal 195-50-15 performance tires
. Rays Lug nuts and Valve stems
I plan to put the AC in just need a slim fan and custom bracket for the compressor to make it all work.. i have all the original parts for the AC from the hatch.... also i have integra front and rear disk brakes that just need rotors and pads before i can put them on... i plan to have this in within the next couple of weeks if i still have the hatch...
on with the PICS.......

.

.

.

.

.

.

.

.

.

.

.

.

.

.
Last edited by TYPE_LS; Apr 2, 2009 at 04:26 PM.
Trending Topics
ok first i like to say nice hatch free bump there , second where the *** do u get those ssr quick release latches for the front bumper ?? lolol i've been looking everywhere bump!! lol
probably going to say no.lol what about a 2002 vw 1.8t jetta? pm me if your interested. its tuned on giacX+ making about 22-23psi


Last edited by catsman50; Apr 5, 2009 at 04:54 PM.
Thread
Thread Starter
Forum
Replies
Last Post
1990 CB7
Honda Civic / Del Sol (1992 - 2000)
6
Feb 27, 2017 11:40 AM
royalrebel
Southern California (Sales)
106
Dec 24, 2009 03:16 PM




