Socal WTT my crx for your Street Bike, Quad, or Dirtbike
Will trade for equal or lesser value plus cash on your part. I was pricing this car around $7000.
1989 CRX Si
Engine:
Bottom end built by B-Series in Socal
B18c1 with approx. 2k miles.
LS crank
Ls rods with ARP rod bolts
P73 pistons
12:1 compression running on 91 pump gas (no pinging)
ACL race bearings
P&P head with port matched AEBS manifold
BC4 cams
BC adjustable cam gears
Blox Springs and Ti retainers
BDL fuel rail with B&M regulator
RC injectors
ALuminum fuel filter with SS line for AN plumbing.com
J1 transmission with Stg 1 exedy clutch and oem lightened flywheel
CTR crank pulley
KOYO aluminum radiator
CTR oil cap
AZ race and machine engine mounts custom anodized
Full shaved bay!
All brand new oem parts were used in rebuild, everything Honda-bonded, all gaskets oem exept for plastice IM gasket. New ITR oil pump, new oem water pump, timing belt, tensioner and spring.
Suspension-
GC's on old stock shocks (suspension was next on my list of things to do for this car).
Wheels, Enkei Rpf1's 15x7 +38 offset
Stock brakes except for racing pads in the front, drum in the rear
Chassis/Body
new paint, sprayed 2007
90-91 tail lights
All new moldings from honda including window moldings.
New sunroof panel from honda
EDM rear wing
oem mudflaps (cut for clearance and it looks better)
JDM hood and front bumper with CF lip
Interior-
MOMO removable steering wheel
Alpine deck
Polk MOMO front component speakers
Boston Rally rear speakers
floor pan covered with sound deadening combo Dynamat and Brown Bread
Autometer gauges OIL press.,Water temp, and Air/fuel, (none hooked up at the moment)
Custom center console built with aluminum and covered with vinyl for gauges and stereo.
2000 Prelude SH seats made to fit over stock crx seat pan.
JDM C&M short shifter with custom billet shift ****
On to the pics-












1989 CRX Si
Engine:
Bottom end built by B-Series in Socal
B18c1 with approx. 2k miles.
LS crank
Ls rods with ARP rod bolts
P73 pistons
12:1 compression running on 91 pump gas (no pinging)
ACL race bearings
P&P head with port matched AEBS manifold
BC4 cams
BC adjustable cam gears
Blox Springs and Ti retainers
BDL fuel rail with B&M regulator
RC injectors
ALuminum fuel filter with SS line for AN plumbing.com
J1 transmission with Stg 1 exedy clutch and oem lightened flywheel
CTR crank pulley
KOYO aluminum radiator
CTR oil cap
AZ race and machine engine mounts custom anodized
Full shaved bay!
All brand new oem parts were used in rebuild, everything Honda-bonded, all gaskets oem exept for plastice IM gasket. New ITR oil pump, new oem water pump, timing belt, tensioner and spring.
Suspension-
GC's on old stock shocks (suspension was next on my list of things to do for this car).
Wheels, Enkei Rpf1's 15x7 +38 offset
Stock brakes except for racing pads in the front, drum in the rear
Chassis/Body
new paint, sprayed 2007
90-91 tail lights
All new moldings from honda including window moldings.
New sunroof panel from honda
EDM rear wing
oem mudflaps (cut for clearance and it looks better)
JDM hood and front bumper with CF lip
Interior-
MOMO removable steering wheel
Alpine deck
Polk MOMO front component speakers
Boston Rally rear speakers
floor pan covered with sound deadening combo Dynamat and Brown Bread
Autometer gauges OIL press.,Water temp, and Air/fuel, (none hooked up at the moment)
Custom center console built with aluminum and covered with vinyl for gauges and stereo.
2000 Prelude SH seats made to fit over stock crx seat pan.
JDM C&M short shifter with custom billet shift ****
On to the pics-












Trending Topics
i have a 2006 yamaha banshee special edition 350 cc.black on black low hours all stock.
http://www.powersportstv.com/models/...alEdition.html
http://www.powersportstv.com/models/...alEdition.html
I appreciate all offers for trades but it would cost at minimum $2000 to ship a car from the west coast to east coast or to the midwest. I need to keep it more local and realistic!
Thread
Thread Starter
Forum
Replies
Last Post
cl3an_98gsr
All Motor / Naturally Aspirated
15
Jan 7, 2010 04:52 PM





