TW:90 civic hatch SHELL
Thread Starter
Honda-Tech Member
Joined: Jun 2004
Posts: 2,401
Likes: 0
From: Northern.IL, IL, United States
Testing Waters on my '90 civic hatch shell. Body is in good shape. Located ten minutes south of Rockford, IL. Would need to be picked up.
Interior: Doesn't have carpet, headliner, or rear seats. Front seats are an SI passenger seat and driverside blue Ebay racing seat. Has an aftermarket pop-up sunroof.
Exterior: Needs a new windshield. Front bumper is new! Passenger front fender has a small ding on a part of the fender lip. Spray painted flat-black by previous owner(only half of engine bay is flat-black, rest is stock white paint).
Barely any rust. As you can see from the rear fender pictures below it is not visible. A couple spots located on the inside lips of the rear fenders. Has hood pins. Car was originally white.
Front SI brakes. Comes on stock suspension. DPFI to MPFI conversion done by previous owner.
No exhaust or exterior trim peices.
Couple things that i remembered. I want to be upfront about anything.
-Dash probally needs to come out as the dash wiring harness is not routed correctly and hangs a little and is caught between the dash and frame. It is not bolted down all the way so no wires are in danger. Harness just needs to be rerouted better.
-Rear driverside upper camber arm-one of the bolt holes in the body of the civic is stripped and will need heliocoil or rethreading.
This is a nice Shell just needs to be finished and I would paint it just dont have the money.
Makes some offers! I may trade for another ef shell(crx, sedan, hatch) or del sol/eg hatch with a decent body.
Or might take cash plus a lower mileage d15/d16 motor and motor parts.
$850 obo! PM me!



Money Shots!



new pics. want to trade for another Honda shell or sell for cash
Might come with DC sports 2.25 catback exhaust and rear trailing arms that need shoes and trailing arm bushing.
Pics showing some surface rust behind rear bumper


Engine bay shot. MPFI conversion is done. Half painted engine bay needs finishing.

I have the cluster cover and center dash cover just not installed.
Interior: Doesn't have carpet, headliner, or rear seats. Front seats are an SI passenger seat and driverside blue Ebay racing seat. Has an aftermarket pop-up sunroof.
Exterior: Needs a new windshield. Front bumper is new! Passenger front fender has a small ding on a part of the fender lip. Spray painted flat-black by previous owner(only half of engine bay is flat-black, rest is stock white paint).
Barely any rust. As you can see from the rear fender pictures below it is not visible. A couple spots located on the inside lips of the rear fenders. Has hood pins. Car was originally white.
Front SI brakes. Comes on stock suspension. DPFI to MPFI conversion done by previous owner.
No exhaust or exterior trim peices.
Couple things that i remembered. I want to be upfront about anything.
-Dash probally needs to come out as the dash wiring harness is not routed correctly and hangs a little and is caught between the dash and frame. It is not bolted down all the way so no wires are in danger. Harness just needs to be rerouted better.
-Rear driverside upper camber arm-one of the bolt holes in the body of the civic is stripped and will need heliocoil or rethreading.
This is a nice Shell just needs to be finished and I would paint it just dont have the money.
Makes some offers! I may trade for another ef shell(crx, sedan, hatch) or del sol/eg hatch with a decent body.
Or might take cash plus a lower mileage d15/d16 motor and motor parts.
$850 obo! PM me!



Money Shots!



new pics. want to trade for another Honda shell or sell for cash
Might come with DC sports 2.25 catback exhaust and rear trailing arms that need shoes and trailing arm bushing.
Pics showing some surface rust behind rear bumper


Engine bay shot. MPFI conversion is done. Half painted engine bay needs finishing.

I have the cluster cover and center dash cover just not installed.
Last edited by civicflow; Mar 25, 2009 at 09:21 AM.
Thread Starter
Honda-Tech Member
Joined: Jun 2004
Posts: 2,401
Likes: 0
From: Northern.IL, IL, United States
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jun 2004
Posts: 2,401
Likes: 0
From: Northern.IL, IL, United States
Thread Starter
Honda-Tech Member
Joined: Jun 2004
Posts: 2,401
Likes: 0
From: Northern.IL, IL, United States
new pics. want to trade for another Honda shell or sell for cash
Might come with DC sports 2.25 catback exhaust and rear trailing arms that need shoes and trailing arm bushing.
Pics showing some surface rust behind rear bumper


Engine bay shot. MPFI conversion is done. Half painted engine bay needs finishing.

I have the cluster cover and center dash cover just not installed.
Might come with DC sports 2.25 catback exhaust and rear trailing arms that need shoes and trailing arm bushing.
Pics showing some surface rust behind rear bumper


Engine bay shot. MPFI conversion is done. Half painted engine bay needs finishing.

I have the cluster cover and center dash cover just not installed.
Thread Starter
Honda-Tech Member
Joined: Jun 2004
Posts: 2,401
Likes: 0
From: Northern.IL, IL, United States
Thread Starter
Honda-Tech Member
Joined: Jun 2004
Posts: 2,401
Likes: 0
From: Northern.IL, IL, United States
Thread Starter
Honda-Tech Member
Joined: Jun 2004
Posts: 2,401
Likes: 0
From: Northern.IL, IL, United States
Couple things that i remembered. I want to be upfront about anything.
-Dash probally needs to come out as the dash wiring harness is not routed correctly and hangs a little and is caught between the dash and frame. It is not bolted down all the way so no wires are in danger. Harness just needs to be rerouted better.
-Rear driverside upper camber arm-one of the bolt holes in the body of the civic is stripped and will need heliocoil or rethreading.
-Dash probally needs to come out as the dash wiring harness is not routed correctly and hangs a little and is caught between the dash and frame. It is not bolted down all the way so no wires are in danger. Harness just needs to be rerouted better.
-Rear driverside upper camber arm-one of the bolt holes in the body of the civic is stripped and will need heliocoil or rethreading.
Thread Starter
Honda-Tech Member
Joined: Jun 2004
Posts: 2,401
Likes: 0
From: Northern.IL, IL, United States
Interested in a good lower mileage d15/d16 block, 14/15 in wheels/tires, d series header, or rear aftermarket anti-roll bar for ef. Plus cash towards my hatch shell for sale.
Or trade straight up for an ef sedan with good body.
Or trade straight up for an ef sedan with good body.


