Anyone running 15" rims on their 02-05 RSX TypeS?

If so, what Make & Model and what offsett?

 

Why 15's?

 

205/50-15 race slicks are cheaper and easier to find used than 16".

 

I can dig it. Budget racing is all too common.

 

Ya. I can find used hoosier or kumho race slicks for 15" all day. But 16" I would have to buy new.

 

2700 lbs is to much car for 205's imo. Leave the 205's to the ek and eg's.....

 

i don't think 15's will fit unless you change out the rotors & calipers.

 

Duh. I dont want to change out the rotors or calipers. That is why i asked if anyone has 15" wheels on their RSX TypeS.

If you don't know the answer, best not leave a response.

 

15" wheels clear a 282mm rotor and caliper by less than 0.25". A 300mm rotor and caliper is going to contact. You may be able to find a beadlock wheel in 15" that does not require a mounting groove that reduces the ID.

 

15's do NOT fit on the Type S models. They came standard on base models that had smaller brakes.

i work at an Acura dealer, this is well known

 

go 16s

 

15 and 205 like stated early isnt gonna be enough meat for a dc5

 

I'm running 225/45 on my 17"

15" sounds dumb on an RSX....16" MIN.

 

It's actually on a DC2 with RSX TypeS front brakes.

And last year for one HPDE I ran 14" Integra wheels with 205/55-14 Hoosier R6 slicks and they worked just fine

 

On the stock 262mm rotor DC2 brakes.

 

ooooooooooooooooooooooooo in that case run 15s and find a brake that will work, less weight ftw

 

That was not with the Type-S brakes on that is for sure!

 

club rsx started selling team dynamics wheels for this very reason

 

No no no lol.. the 14" Hoosiers was on stock DC2 brakes.

I'm sure the RSX TypeS brakes will work fine for me. The rotors and calipers were free, and FASTBRAKES.com is doing all the machine work and re-drilling the rotors for $125 shipped back to me. So that's a pretty cheap brake kit and I wanted to try it.

 

Type S 6 speed, 200Horse, and 15's...

Burnouts in 4th FVCK yeah bro. do it.

 

This, It took 17 replies before someone mentioned team dynamics wheels.

 

team dynamics are whats up. thats what i had to run at the track because of my brembo conversion.

 

thats cause were all soopernoobs compared to you Mister Skanky, not all of us can be OG Honda Thugs likes you duh

 

ya I found the Team Dynamics on clubrsx already. I also heard that Kosei K1's would work too... hmm.. possible?