How to clear wrench in dash(gauge)

Reply Subscribe

Thread Tools

Search this Thread

Feb 1, 2009 | 07:10 PM

thunderboy

Thread Starter

Honda-Tech Member

Joined: Nov 2005

Posts: 166

Likes: 0

From: curacao, non, netherlands antilles

How to clear wrench in dash(gauge)

Can someone help me clear that little wrench in car gauge/dash.How to/ What to do.

Thanks a lot

Feb 1, 2009 | 07:16 PM

ironworker

Junior Member

Joined: Oct 2008

Posts: 363

Likes: 0

From: 765/407 U.S.A

Re: How to clear wrench in dash(gauge)

Quote:

Originally Posted by thunderboy

Can someone help me clear that little wrench in car gauge/dash.How to/ What to do.

Thanks a lot

that wrench is your service minder.. You might wanna go to the dealer or read your owners manual to see what you need to change on your car. To clear it press and hold the "sel reset" button....

Feb 1, 2009 | 11:08 PM

av911

Honda-Tech Member

Joined: Jun 2006

Posts: 775

Likes: 16

From: San Francisco, CA, USA

Re: How to clear wrench in dash(gauge)

RTFM!! It's not that hard.

Feb 1, 2009 | 11:14 PM

Kidnkorner

Honda-Tech Member

Joined: Nov 2002

Posts: 2,659

Likes: 0

From: Maricopa County

Re: How to clear wrench in dash(gauge)

with the engine off turn the key to acc then toggle the button until you see the maintenanceminder. Once on there press and hold the reset button for like 20 seconds it should clear.

Feb 2, 2009 | 05:04 AM

-RideEmHard-

Junior Member

Joined: Jan 2009

Posts: 23

Likes: 0

From: Toronto

Re: How to clear wrench in dash(gauge)

Quote:

Originally Posted by Kidnkorner

with the engine off turn the key to acc then toggle the button until you see the maintenanceminder. Once on there press and hold the reset button for like 20 seconds it should clear.

then the light will flash then let go n hold down again for anouther 20secs will reset to 100%