hey guys, im swapping a b18a out of a 90 integra into my 90 std hatch. i was wondering which resistor box would work for my mpfi wiring. i know an si one will work, but is there any other ones that would work? i heard an 86-89 integra and an accord one could work too???

 

did you happen to get the one from the 90 teg?? you will need the teg engine harness to convert yours to mpfi, or an si harness can be used as a donor as well.

 

no i didnt, but i can get one from another teg in the junkyard. i can us the teg harness as well? i thought it strictly had to be an si one, but i guess there is not much of a difference cuz they are both obd0. anymore input?

 

no you use your harness for your chassis, then you use certain parts of the si or teg harness to convert your harness to mpfi...the write up is in the faq...

 

ya i know to use my existing harness and modify it. i was just wondering about the resistor box. thanks

 

so what other resistor boxes will be compatible?

 

i'm pretty sure any of them will work. so long as it drops the the +12v to the 5.5v region.

 

ok thanks guys

 

All of the DA or ED/EF resistor boxes are the same.