I parted out an EG hatch. These are the remaining parts. More pics to come as I pull the stuff from the car. Check back, I will be adding more parts off the car and as I clean out my garage.

If you don't think a price is fair then throw me a reasonable offer I won't roll my eyes at.

Pickup Location: 10954 NY. Willing to meet up to 15-20 miles.

Buy with confidence. Paypal verified. 100% Positive feedback on Ebay



Contact: todaparty@gmail.com (also my paypal)
or call/text 845-641-0999 (Jason)



Hella Supertone horns - SOLD
B-series vtec Spark plug cover - SOLD
Alpine Speakers - SOLD
ITR imitation shiftknob in black - SOLD
LS 5th gear - SOLD
Tial 50mm bov Al flange - SOLD
EG "mugen style" Lip - SOLD
Tilton Hydraulic Release bearing – Bseries - SOLD
Defi Boost Gauge D-gauge - SOLD
Apex’I AVCR Electronic Boost Controller - SOLD
Momo Competition 350mm Steering Wheel - SOLD
Sparco 2" Clubman 4 point buckle harness & Corbeau 3" 5 point camlock harness - BOTH SOLD
Distributor Ignitor - SOLD
B-series VTEC Cap, rotor, gasket, rotor screw - SOLD
Honda logger - SOLD
Rear Seats for EG/DC - SOLD
EG Carbon Fiber Hood- SOLD
JDM EG Headlights - SOLD
NGK spark plug wires for Bseries- SOLD
OEM HONDA EG Lower ball joints - SOLD
ROTA center caps - SOLD
JDM EG VTi Gauge cluster - SOLD
EG Carbon Duckbill - SOLD
PLX M300 Wideband - SOLD




Del Sol Seats - KEEPING THEM - Good condition, small tear on driver’s side bolster, Green stripes, EG/DC rails.



Parts for Pickup Only:
X

Parts I'm willing to ship:

Fastbrakes 11" 4 piston Wilwood Dynalite Caliper front brake kit MINT with an EG 9.5" brake knuckles, brand new wheel bearings, ARP wheel studs all installed in the Spring of 2008. Less than 1000 miles, all I did was some dyno tuning, highway pulls, and some street driving for a few days this summer. Also included: extra box of Hawk HPS pads. Current pads are at 85% life - $600 + SHIPPING. Would prefor local pickup cuz they are damn heavy.




Tial Wastegate Spring (Large Red) - $20 shipped>> PENDING – either 11.6 or 10.1 psi – pretty sure it came from a 44mm which would make it 10.1.



JDM EG Vision Smoked Amber Corners - $75 shipped – Mint except for the passenger mounting tab is half broken off – you can see it in the first pic. I had to duct tape it to the fender so that’s what the white residue is on the front lens – can be easily taken off w/ any buffing compound.




HA sport EG/DC B-series mounts (3) - $265 shipped - Used, still work fine, little scratched up. Race hardness.





Motorola 2.5 bar map sensor - $20 shipped- HPX4250AP K0501AL on the back. New wires soldered on. Used it for like a day then replaced it with a 3 bar.




AEM 2.5” short ram tube- $60 - Bracket is cut off. No filter. Couple scratches.



DC/EG 19mm rear sway bar - $75 - I believe its a suspension techniques, but don't quote me. Comes w/ the bushings for the subframe, but no end links.



OEM Nissan HID ballasts - $100 shipped, will not sell just one unless you find someone to take the other. Combo: Bulbs & ballasts for $155 shipped(see below) - Off an 03 maxima I think. They worked fine, I just don't feel like doing a retrofit on my EK (nor do I need the attention from thieves)



Phillips D2R HID bulbs - $80 shipped, will not sell just one unless you find someone to take the other. Combo: Bulbs & ballasts for $155 shipped - Also off an 03 maxima.



Mercedes ML projectors - $45 shipped NON bi xenon.

http://img.photobucket.com/albums/v3...e/P1000834.jpg


Acura Amber Radio - $45 shipped – Mint, works fine. I have an IPOD radio, so I don’t need this one anymore. Will include security code obviously.



Honda centercaps $35 shipped – Rota ARE SOLD. – Hcaps are P/N 44732-S0X-A00


http://img.photobucket.com/albums/v3...e/P1000862.jpg

Yokohama Advan A046 (2)- $100 235/45-17, stock Evo 7/8 tires. Good tread left, see pic, probably between 70-80% tread left. 2nd pic is a closeup of the wear indicator.




B/D series VSS - $30 shipped



Compustar Alarm w/ Remote - $50 shipped – Just the remote and the brain.



OBD2a (97)LS intake manifold w/ AIT & IACV(not in pic, will include) - $ 40 + shipping

http://img.photobucket.com/albums/v3...e/P1000837.jpg

OBD2a (97)LS Water Neck (back of the block)- $15 shipped

http://img.photobucket.com/albums/v3...e/P1000849.jpg

OBD2a (97)LS Thermostat housing - $40 shipped - thermostat, coolant sensor included

http://img.photobucket.com/albums/v3...e/P1000846.jpg
http://img.photobucket.com/albums/v3...e/P1000847.jpg

OBD2a (97)LS timing belt cover - $20 shipped

http://img.photobucket.com/albums/v3...e/P1000859.jpg

LS alternator belt - $ 10 shipped - good condition, about 15k miles

http://smg.photobucket.com/albums/v3...t=P1000851.jpg

3” Exhaust 3 bolt flange- $15 shipped – I cut it off so I could run an exhaust clamp. Its off a Lovefab 3” exhaust.

http://img.photobucket.com/albums/v3...e/P1000865.jpg

Thermal sleeve for 2.5 piping - $20 shipped - 3 inch or so long tear, doesn’t really affect it. Good for shielding IC piping from a turbo or an exhaust manifold..

http://img.photobucket.com/albums/v3...e/P1000870.jpg

90 Degree mandrel bend intercooler pipe 2.5” - $25 shipped - bead welds on the ends for sealing. Mild steel, 2.5”.

http://img.photobucket.com/albums/v3...e/P1000867.jpg

Stock EG hatch upper control arms Make Offer
http://img.photobucket.com/albums/v3...y/P1000616.jpg

OBD2a (97)LS timing guide plate (goes between the drive and the crank pulley Make Offer

http://img.photobucket.com/albums/v3...e/P1000860.jpg

 

reserved

 

^^^

 

heading up to buffalo this coming weekend, I can deliver along the route

 

Added: EG front lip, EG rear 19mm sway bar, Rear Seats, Honda log

 

Pending Sale:

3" Corbeau Harness

Acura CD/Radio

HAsport Mounts

Defi Boost Gauge

AVCR

Hella Horns

 

Pending:

Tial BOV flange

Lower Ball joints

 

very interested in the plx......but alot of ur stuff looks like condition isnt that great....
pm me if ur willing to work with the price.

 

the PLX looks fine to me?

PM'ed

 

SOLD:

LS 5th

Tial BOV Flange

 

bump

 

^^^^^^^^^

 

bump

 

bump, updated