Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for Race Car parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.

 

Parting this Car Out - Lots of Great Deals -- Lots of Great Parts !!!!

All Parts are basically brand new, engine and car have only been idled and driven around the parking lot, never been on a dyno or the race track.

For information or to purchase parts:

Phone -- 407-324-4684
Email -- James@IPGParts.com

Skunk2 Pro2+ Camshafts -- $500

BDL Black Fuel Rail -- $100

Peakboost Top Mount T4 Turbo Kit including, T4 Top Mount Exhaust Manifold with Tial 60mm W/G Flange, 4" Downpipe, 3" Intercooler Pipe Kit Tial Flange with Silicone Couplers and T-Bolts, Intercooler Core, Turbo Feed and Return Lines -- $2500

Intercooler Setup Only -- includes Garrett 24" x 12" x 4.5" core (32" total length including endtanks) -- 3" inlet/outlet, all silicone couplers, all t bolt clamps -- tial 50mm bov flange already in place -- for a top mount turbo setup -- $1350

Peakboost Top Mount Manifold (T4) with 4" Downpipe -- $1350

Garrett GT4294R Turbocharger with 1.01 A/R -- $1500

Fluidyne 92-95 Civic Half Size Radiator with Slim Electric Fan -- $285

M&W Pro 10 Ignition with T1 Harness and Crane Coil -- $650

For information or to purchase parts:

Phone -- 407-324-4684
Email -- James@IPGParts.com

 

BNIB skunk2 pro1's. $510 shipped.

TILTON used [lots of life left] hydro bseries twin disk clutch $700 plus shipping





4" steel exhaust system off my delsol w/ vband connection and magnaflow muffler. $250 picked up




precision used 750hp intercooler. $350 plus shipping
aluminum intercooler piping [2.5" hotside, 3" coldside], tbolt clamps, vibrant couplers, flanged for tial 50mm bov. (bov not included) $200 plus shipping




new never used b16 head, skunk2 valve springs, retainers, valves. S&S speed shop [in queens, ny] port/polish. 3 angle valve job. milled .020". new lmas, new valve seals. $1300 plus shipping.





NOS 4fogger direct port nitrous system. complete w/ pressure gauge and bottle warmer. setup for a 120 shot. $550 plus shipping.




newly built darton sleeved ls bottom end 85x89. it comes with new coated WISECO 85mm 9.5:1 pistons, new EAGLE ls rods, knifeedged/balanced/micropolished crank, DARTON sleeves, new ACL race coated bearings, new COMETIC 85mm headgasket. missing oil pan, oil pump, water pump, and timing belt.
selling for $2000 firm.

 

--------------------------------------------------------------------------------
For sale is a Full-Race 3'' down pipe For use with B series bottom mount prostreet manifold only. The down pipe is in near perfect condition.

BRAND NEW GRP aluminum rods for sale for 84mm bore. For LS/ B20 motor. 450.00 please add 3% paypal fee's.

* Thermal R&D 3'' exhaust for Integra 3 door F/S. This is great for a full 3'' turbo exhaust, no need for test pipe. Prefer Local pick up only...

 

50mm twm itbs, 1200, injectors not included. selling to upgrade to a bigger set

 

I have two AEM EMS boxs for sale. 30-1040 and a 30-1060

Looking for like $1100 ea. obo

 

Was gonna build a big motor but due to financial problems, this will have to wait until another time. This is what I got.

-H22 Skunk2 Pro2 Cams (NEW) $550 shipped
-H22 Pro Series Valve Springs (NEW) $275 shipped
-H22 Pro Series Valve Spring Bases (NEW) $30 shipped
-Eriks Racing Side Exit Header (Stainless/Used) SOLD
-H23 Crank (Pulled out of a running motor, mic'ed and within spec, no damage whatsoever) $175 shipped
-H23 Rods and Pistons (Pulled from same motor) $100 shipped
-Kaizen Balance Shaft Remover (NEW) $105 shipped
-Action 1MS Clutch Kit (NEW) $310 shipped

 

Alright guys, here it is. I'm just gonna make a list and if you have a question just ask:
-B16 head, this head is spotless. was sent to engine lab of tampa for cleaning and a 3 angle valve job. has itr springs, retainers, gsr cams, vtec solinoid, golden eagle cam plug, and the 2 coolant sensors. No dizzy. head has already been tapped for ls/vtec, but i have the plug to put back in it in case you're putting this on a vtec block, just let me know. SOLD


-Tial BOV. silver, brand new in the box. all fittings, flanges, and gaskets SOLD
-Tial 35/38mm wastegate. part is used, works fine, was removed to go 44mm. silver also, will include new gasket and dumptube $150 OBO
-Hasport auto to manuel b series mounts. these mounts allow you to drop in a b series motor w/ manuel trans. into any eg/dc automatic chassis. no cutting or welding required. the timing belt mount and rear mount are used, but the trans mount is brand new $350 OBO
-MSD pro billet distrubutor setup for b-series vtec heads. includes 2 external coils, 1 used, 1 brand new in the box $400 OBO
-Intercooler piping. Piping was coated black, was in an eg coupe, but will fit with minor mods. already flanged for a tial bov. includes couplers and tbolt clamps $200 obo
-Intercooler. this is a custom intercooler using a griffin core and custom endtanks. it has a few battle scars, but does not leak at all and has been proven to work on a 500+whp car SOLD
-JG edelbrock intake mani setup. for b16/type-r. This includes a brand new iacv, brand new tony1 saturated 1000cc injectors, brand new hondata intake gasket, and a brand new skunk2 composite fuel rail. If you look up some of these parts, you'll realize how much money is actually involved in a setup like this $650 OBO
-UGR cast b series turbo manifold. has a central located 38mm wastegate flange and is brand new in the bag $200 OBO
-b series in eg/dc shift linkage, will include brand new set of energy suspension shifter bushings $100 OBO

 

FS: MoTeC M400 ecu, Mil-Spec harness, T1 Trigger kit, etc. Purchased from T1 a couple months ago. I will not part out anything unless the M400 and harness sell. Then I will sell the Trigger kit seperately. Possibly willing to sell the M400 ECU only. Options I purchased include:

- MoTeC M400 ecu
- 512k logging upgrade for M400 ecu
- UTC USB to CAN adapter cable
- Mil-Spec DR25 Harness wired for fuel pressure, oil pressure, exhaust backpressure, boost control, strain gage, fan, fuel pump, vtec, lambda and all normal fuel injection sensors. This includes all the top quality relays and aluminum mounting tray. This will fit 92-00 civic and 94-01 Integra. May fit others, but this is guaranteed.
- T1 Cam trigger kit with black/red cam gear for B-series.
- Map for 1600cc injectors, S372R, Pro1 cams, etc.
PRICE FOR ALL OF IT! = $5500 shipped via FedEx insured 2-3 day air.
Paypal +3.3%.








FS: Almost new Garrett GT42R ball bearing turbo. USed for 5 dyno passes only. Mint condition. .60 cold / 1.01 hot. Divided housing that has been HPC hi-temp coated. Turbo is mint and has oil feed fitting/flange included. Also included is the clamp and flange for the discharge side into the IC.
I can include the black earls coolant lines and fittings as well as the boost fitting for an additional $40.00
Price = $1300 shipped Insured FedEx

 

-FAST Sequential ECU
-FAST ECU Data Logger
-FAST E-DIST Electronic Distributor (for running individual coils)
-All Data cables, partial Honda Harness SOLD
Recently received a checkup from FAST and got a good report card.


TWM 52mm ITBs for GSR - NEW PRICE $850 shipped!!!!!!!!
Great condition, never installed on motor, but look like they have been sitting on a shelf for a year. Includes TPS and FPR, no injectors,


MFactory Adjustable Cam gears, new in box - $125 shipped


H22 throttle body - $35 shipped


-Edelbrock Victor X manifold, natural finish, brand new in box never opened - $320 shipped
-Full Race Stage 4 K-Series turbo kit T3/67mm - $3000
-Taylor aluminum Battery box for 16 Volt or large battery - $50...ordered by accident and just paid $95 from Summit
-Supertech Spring and Retainer kit for turbo B-Series - $290 shipped new in box

22x9x13 M&H Racemaster - 50 passes @ 215hp - $50
24.5x8x15 MT ET Drags - 10 passes @ 330hp, still look new - $150

 

Got a Turbonetics 60-1 with a T4 flanged .70 exhaust $455 shipped
Got a AEM Boost Solenoid kit (sold)
Got a Tial Silver 44mm wastegate (sold)
Got a Aeromotive Pro Series Fuel Pump (sold)
Got a Aeromotive 10 micron fuel filter $65 shipped
Got a H23 benson sleeved block 90mm, nicks in one sleeve may need one sleeve, crank included (sold)
Got a Golden Eagle vacuum box (sold)
Got a H22 Venom Intake manifold for sale. Looking for $275 shipped. Pending
Got a MSD HVC Coil for sale. Looking for $80 shipped
Got a H22 race T4 split scroll turbo mani for sale SOLD

 

Prices do not include shipping or Paypal charges unless otherwise stated. I might consider some trades, just let me know what you have to offer. More pictures upon request.


88 Honda CRX SI rolling shell clean title. This car has been family owned, my dad bought the car brand new from a Honda dealership back in 88. What’s all included: NHRA certified chromoly cage, Moroso battery box, Shut off switch, jdm type-r cluster, fake spoon steering wheel, sump fuel tank with one -12 line 3ft long off the sump, one -10 line 2ft connected to a magnaflow splitter with two -8 lines ran to the engine bay also one -8 return line, front extended wheel studs, stainless steel brake lines all around, tilton master cylinder (car has been converted to hydraulic), wings west body kit and fiber image hood with a little damage on it. Car is street legal, all headlight and turns signals work. $3300.00


CLICK ON PICTURES TO ENHANCE IMAGE










Here is some pictures of when the car was running.






Used Motec M4 with all options unlocked. Comes with data cable, baro sensor, distributor, o2 sensor and the motec Honda harness. Harness is missing a few connectors: est, positive battery, baro,wastegate, map, aux temp. $2600.00 OBO




Set of Bogart wheels with MH Slicks $1000.00
*Frt. 13in wheels 8.7/25-13 MH slicks
*Rear 15in wheels 3.6/24-15 MH DOT Skinnes




Simpson Bandit Helmet Large SA2000 date of MFG:02/05 SOLD


Impact Racing Jacket and Pants size: X-Large SFI 3-2A/5 Approved. SOLD


JDM GSR hydro tranny W/OBX diff. $700.00 FIRM (Pick up only)






B series v-tec NGK spark plug wires W/MSD cap and coil wire $50.00



2 B series starter's left $50.00 each



One B series half shaft left $75.00



Edelbrock intake manifold (b16 or Type-R head) with 76m Blox T-body SOLD


Complete turbo kit made for a CRX. Kit includes: Inline pro T4 manifold with a Tial V60 (1 bar spring) with dump tube, Burg Warner S372 turbo with 4in down pipe and -10 oil return line and -4 feed line, , 3in aluminum piping with Vibrant V-bands (x3) hose couplers (x2) with clamps, Tail bov, and a custom intercooler (precision core 24x12x3). $3000.00
OR
3in aluminum piping with Vibrant V-bands (x3) hose couplers (x2) with clamps, Tail bov, and a custom back door intercooler (precision core 24x12x3). $1000.00









Complete long block. Motor has very low miles only made it to the track less then 8 times this year. LS block with Golden Eagle sleeves, head studs, mains, girdle, head gasket, golden eagle vtec conversion kit, block is bored 81.5 with Eagle rods and JE pistons 9-1, Type-R head port and polish with 1m over size supertech valve’s, retainers and springs, crower turbo cams. $3500.00 (Pick up only)
Compression Test
COLD WARM
1) 200 210
2) 185 200
3) 200 205
4) 195 210







M&W PRO-10 with harness $450.00 Shipped



MSD Blaster II Coil $125.00




Magnaflow Regulator $140.00




Catch can W/lines & Valve cover. SOLD


(Bosch top feed fuel injectors# 0280 150 846) SOLD


Golden Eagle Scatter Shield SOLD


G-Force Window net (date: APR. 08), G-Force Seat belt (date: AUG. 08) G-Force gloves (size: large) $140.00




G-Force Seat belt (Expired) perfect for the passanger seat. SOLD


Custom center console for a 88-91 CRX W/ Auto Meter Gauges (Boost, Oil, Water) and Carbon Fiber switches $175.00




STR fuel rail W/-8 fittingsSOLD


AEM Fuel Sensor $100.00




AEM 5 Bar Map Sensor $120.00




Boost Solnoid $120.00

 

EG/EK/DC traction Bar, clears h2b setups as well...($SOLD)

Blox B Cams for h22: $350
H22 Port Flow Valve Train: $200.00 Shipped.

OEM H22 intake manifold with doublestack IAB plates, ported inside and matched for a 70mm tb. $175.00




bb6 1997+ stock Prelude Header $100.00 shipped


h22 cylinder head with cams and caps only: $225.00


Spearco Intercooler $150:


h23 shortblock with no internals $50:

 

Selling race car with many extra parts. Asking $9,000-obo for the whole thing.
Chassis-1999 Honda Civic Si Chop Top
Class-All Motor
Engine-B18C1 Stroked and Deck Plate to a 2.3
Bore-86mm
Stroke-98mm
Crank-Eagle B20
Rods-Eagle
Pistons-Arias
Port Job-Port Flow
Cams-Ferrea and Roller Rockers
Valves-Rev
Throttle Body-BDL 74mm
Fuel-Methanol
Tranny-GSR
Header-Custom Burns
ECU-AEM
There are no drag rims or tires with this car. They have been sold all ready. The car is on stock wheels.
You can email me at jlopes@twcny.rr.com or on here for info.

 

Vibrant Timing Belt Tensioner

Vibrant Timing Belt Tensioner
Brand new in package. Purchased it for my second motor and never used it.
Works on any B-Series engine.
MSRP is $215
$125 + shipping & 3% for Paypal. (BRAND NEW)

Also have a used B-Series Tensioner from my old Motor
$95 + shipping & 3% Paypal (Still in Mint Condition)


Putting a hold on my K-Series EG Project and have a bunch of BRAND NEW parts to sell.



K-Series Fuel Rail in SILVER (Brand New) in Box
$100 Shipped + 3% Paypal



Billet Adjustable Swivel Neck for K Series.
More Info can be found at http://www.k-tuned.com/kthermostat.html
$130 Shipped + 3% Paypal


K Series Waterpump Pump Block Off Plate with Alternator Kit and Belt.
This is the first Kit which K-Tuned Sells on their site @ http://www.k-tuned.com/kwater.html
$180 Shipped + 3% Paypal



K-Tuned K-Swap Traction Bar for 92-01 Civic and 94-01 Integra
** Will also work with D and B Series Cars **

BRAND NEW IN BOX
$280 SHIPPED + 3% Paypal

 

aem injector driver. $200 + shipping

aem boost solenoid 55 shipped used for about 10 track passes

 

-I'm selling the Xtrac tranny from our crx. It's a 6 speed sequential setup. Includes midplate to bolt up to a b series motor, custom flywheel, and AP 5.5" triple disc clutch. We have some extra clutch parts we'll throw in for it. $6,000 takes everything.

http://www.hondamarketplace.com/show...ighlight=xtrac





(714)290-2663 Tony

 

FS: 24x8.5 Haulmark enclosed trailer, red. Dual HD axles, electric brakes, tires in good shape, ramp w/ extender, one side door, interior is all wood, have added one interior light, electric tongue jack, and additional wall tie downs, has four floor tie downs. will also include tongue lock, class IV load leveling kit with hitch and 2-5/16 ball. $5k picked up. Can discuss delivery or meeting for additional $ per mile.

 

Custom GSR Magnus Manifold one of a kind mesurements great for allmotor $650
Brand New Edelbrock manifold $350obo
RMF custom side exit no other like it $1000obo
Custom Magnus dogbox transmission good for a turbo car no diff$4000obo
Stock SIR tranny no diff $450
Ls gearset $300
2 Mark williams spools and flanges with intermediate shaft best stuff on the market $1900obo
Used set of 4 450cc injectors high resistance $150
Used venom pump with -6fittings $150
Brand new ATI b-series race dampner $450
used 3stage peterson fluids dry sump pump $600
Brand new B-seies dry sump pump bolt up kit and drive kit $400
Used Dta E48 with harness sensors and crank wheel $1400obo
Used aeromotive fuel pressure regulator with -6 fittings $200
Race Motor B20/GSR head Rebuilt Custom stroker cranck, one of a kind Saenz rods 400grams lighter the eagles, Custom 14:0:1 CP pistons, GSR head is fully ported and polished ferrea roller rocker setup, ferrea Valves and springs titainium retainers and locks. 280hp and 205ftlbs of torque on methanol$6500obo
Tilton 5 disc carbon fiber clutch with chromoly flywheel $2500obo
Edelbrock 75mm mustang throttle body SOLD
Edelbrock fuel rail with honda fittings $150
Buyer pays shipping and paypal fees
PRIVATE MSG ME IF INTERESTED

 

Brand new Weld Magnums 13x8, 5'' backspace, sold without slicks, $600.00

AFI Ramhorn, Brand New, T3, 38mm flange, $700.00 obo

 

These are MINT Corbeau TRS seats with corbeau sliders and NEW corbeau 5 point harnesses. Seats where bolted in and sat in maybe 5 times..
$1,000... No Trades

 

HUGE price reduction!!! First person to call takes them...


-Selling a pair of Crane Cams roller camshafts with turbo specific grind and Ferrea roller followers. Complete for a bolt on and go install. Used on a race only car for 1 season and never saw street use. In like new condition. If your looking to get the most power out of your B series then this is the setup for you. The roller design greatly reduces friction, increasing horsepower. In addition, the turbo specific grind reduces turbo lag, increases boost response and creates maximum power. Fits 1990-2000 B16A and B18C DOHC VTEC motors. Crane Cams part number is 253-0510 and Ferrea roller followers part number is 253-0805.

Selling complete for $999.00. These parts retail for more than $2,500.00! Your savings is greater than 60%. Take advantage of this limited opportunity!

Call (818) 624-4488 ask for Mark



-Selling a mildly used Circuit Worx 4.72 final drive. This is the type R gear ratio! Used on a race only car for roughly 5 quarter mile passes. Since then, the car has been sold and parted out. In like new condition. If your looking to get faster acceleration, add reliability and strength to your transmission then this part is for you. Circuit Worx part number is FD-I47H. Fits all Integra hydraulic transmissions.

Selling for $499.00 This part retails for $900. Take advantage of this limited opportunity!

Call (818) 624-4488 ask for Mark

 

new ferrea roller camshafts with turbo specific grind and roller will let it go for $800 never open

 

I got a BRAND NEW Bullseye Power/Borg Warner T4 S366 .83 AR turbo up for sale. Will come with extras such as, Drain Flange, V Band flange and clamp ( for Exh side) and the exhaust side has been thermal coated, compressor side has also been powder coated black. Pics available upon request.

Specs:
Compressor
Inducer = 66.8 Extended inducer tip
Exducer = 92.7mm
Trim size = 45 (due to extended tip)

Exhaust
Inducer wheel diameter = 80.4mm
Exducer size 67.7mm

Turbine = T4 .83A/R

Also have a S372R compressor cover, in a polished finish. Pm me for pricing if interested in anything. Thanks
__________________

 

G-Force 7 1/2" shift lever with T1 strain Gauge (installed by Tony palo). Brand new never installed or used ! This shifter in used for clutchless shifting with a Dog box transmission. $800.00 obo.