$1500 with Skunk Pro Series Mani
$1300 with oem gsr mani

Well after starting the part out on my gsr i was gonna swap the b18c in my EJ but now have decided i'm gonna go baller and get a S2k around tax time so now the b18c must go.

Approx 100k miles, doesn't smoke at all nor does it use any oil. Has skunk2 pro series manifold and 1lb underdrive pulley. Thats the only mods. My gsr with this motor ran low 9's in the 1/8th and mid 14's in the 1/4 with a best of 14.3 with just bolt ons. I have vid of a 14.48 run if anyone needs to see it. Compression is 190-195 across the board. Look at my GSR INTEGRA part out thread for pics of the motor and the car if you need any parts off it.

I will deliver this engine personally to the surrounding states for $60ish or in other words my gas paid. Those states include, PA, MD, VA, OH, KY, TN, NC. This will save the buyer major cash and will help (me sell it/u buy it) faster. I have a vid i took just before i started parting out the car. I has the cold start up, idling, driving, reving, etc. I'll try to post it soon.

 

since i'm getting numerous questions about it............No this doesn't include the trans, ecu, linkage, axles, aka (the entire swap for $1500, haha lol)

This is just the motor. Its more then a fair price, especially considering the cheap personal delivery i'll be doing. Probably the best deal for a gsr motor is from hmotorsonline which is gonna run you a bit past 2grand after shipping. I'm asking 1300 for the same thing minus the ecu and 1500 with the skunk mani. Again its more then a fair deal. If i can get what i'm asking out of the engine though i'll sell the ecu at a very good price. Thanks guys.

 

swaps go for what your asking on here. you should try craigslist if you want 1500 for a longblock with 100,000 miles

 

price is high fair price if it was a full swap

 

x2 way high

 

A gsr swap the same price as a obd-0 b16 swap huh? bahahahahahaha lol yeah i'd like to see you guys get a full gsr swap for $1500. lol Nice try fellas. $1300 isn't bad at all for a b18c1 with a measly 100k miles. You guys can try low ballin some else. Thanks

 

not trying to low ball i have one out in the shed your price is wrong you dont have a swap you have a 100k block right now on japan star you can get a jdm motor with warranty gsr that is for 1800 shipped to your door and has much less then 100k just letting you know so your not posting forever

 

nobody is trying to bash we are just telling you that you are un aware of what your parts are worth. that motor will never bring 1500 dollars on this forum. you are asking about double what anyone is gonna give you for it

 

didn't say anyone was trying to bash me man, just saying that this is not a bad price. Don't forget i'm asking 1500 with the skunk mani. Someone can still buy it for $1300 with the oem mani. For someone locally that i can deliver too that's almost 500 less then what JDM Star can do according to the above mentioned post. So you're telling me that a b18c with a lil more miles then you can buy one from Jdm Star is worth paying $500 extra for? Well that'd be someone else's loss not mine. If you don't want the motor then no biggie but don't set here and tell me its only worth $750. Thats just an insult. I've got it for sale on many other forums besides here and trust me it'll bring much more then $750 my man. Talk about being unaware of what parts are worth. lol

 

a b18c1 and a b18c are different motors slightly. the c being more sought after, and again i said you have more then double the mileage and japan stars price. they also will ship anywhere in the us for that price and add a warranty. skunk2 mani retails at 229 shipped again to anyones door in the us. id be shocked personally if you reach 750 on a 100k block that youve obviously dragged according to your previous statements

 

o and one last thing 500 buys you a warranty ease of not having to worry about picking up and half the mileage and slightly better power curves

 

buddy who the hell do you think you're talkin too here. I know the difference in a C and C1 and its not enough to even consider the price difference. As far as mileage difference there's about 50k difference. If a measly 50k miles on a honda motor is worth 500 bucks to you then you are not a wise shopper and obviously this deal isn't for you.

As far as warranty you get a start up warranty with jdm star. Don't think for a second you'll be able to buy that motor drive it for months and then try to have them cover your repairs if needed. You get a start up warranty which anyone gives.

Not sure what your point is quoting a skunk mani price but good for you, you know how much a skunk costs as everybody does. lol

As far as shipping this won't be the best deal for someone out of the states as i mentioned. Thats already been addressed so whats your point? If you're out of my range to take advantage of my delivery then simply don't buy it.

U do know that most jdm gsr's don't put down anymore then a usdm don't you. I've beat plenty of jdm b18c honda's because the difference is just that slight. When u say slightly better power curves you better put a **** ton of emphasis on slightly if any. lol

Yes i've ran my car at the track just as anyone else has. You're not gullible enough to believe a dohc vtec hasn't been ran some are you?

For $500 you're only getting 50k less miles and nothing more.

Surprised if i even get $750 huh? Well you're obviously one of those lowballin want everything for nothing kind of honda-tech guys. Best thing for you too do is just quit posting on my thread and my super overpriced B18c1 can just lay there and collect dust. Thanks a bunch.

 

if you keep asking for 1500 for a 100k mile longblock and getting mad when people tell you why you wont get it you should put this on and get ready


**FREE BUMP FOR BEING FROM WV**

 

I already told you once i'm not mad. I'm just pointing out the obvious truths and how i'm not asking too much for this motor. On honda-tech i guess its too much cause this place is the low baller offering capital of the internet. lol Flame away boys flame away. Its obvious from all of you getting your panties in a twist that its probably not gonna sell on here anyway so i could give a **** less.

Every other site i have this on i'm getting decent offers and alot of interest for the simple fact that people understand this is a decent deal for the ones in the surrounding states. Again thats something the low ballers on here just don't get. They just want to try and flame their way to a good deal and that won't work with me. Thanks for the bump though.

 

no dont want it have one and several other motor head types better power curve meaning more power earlier longer

 

i just got a whole gsr swap - axles for 1400 from here. he even let me take the engine harness...

just throwin it out there to help you sell it cheaper and have money faster

your choice

 

thanks man but have been parting the motor out. Sold the bottom end for $600 (when i was told i wouldn't get $750 for the whole motor) and have a buyer for the head at $400. Still gotta sell the skunk mani, tb, sensors, ac compressor, alternator...............well...........you get the point. I'll come out making about 1400 or so on it when its all said and done. Just throwin that out there to all those who wanna make some money. Thanks for the advice though guys.