WHEEL OFFSET QUESTION
Thread Starter
Junior Member
Joined: Jan 2008
Posts: 16
Likes: 0
From: lawndale, ca, los angles
WHEEL OFFSET QUESTION
98 honda accord v6
oem offset +55
what offset would fit on my car? can you name them all
lowered car about 1.5 front n 1 in back
i want 18x8 , with 215/40/18 tires, but i dont know what offset to pick.
THE WHEELS I WANT IS 5ZIGEN PRORACER
i lowered my car a bit, not enough because the fender didnt over up the tire
tein ss springs 1.5 front 1 rear
anyone give me any tips, on what offset and what tire size.
215/40/18 = id idnt know what does 40 mean, can anyone tell me, thank you
oem offset +55
what offset would fit on my car? can you name them all
lowered car about 1.5 front n 1 in back
i want 18x8 , with 215/40/18 tires, but i dont know what offset to pick.
THE WHEELS I WANT IS 5ZIGEN PRORACER
i lowered my car a bit, not enough because the fender didnt over up the tire
tein ss springs 1.5 front 1 rear
anyone give me any tips, on what offset and what tire size.
215/40/18 = id idnt know what does 40 mean, can anyone tell me, thank you
For my 4cyl, i ran a 18x7.5 with a 42 offset and i needed to get my fenders rolled. I was on s-techs. Wheels were flush with the fenders.
The 40 is the size of the sidewall on the tire. That number varies depending on your drop, camber, rolling or pulling your fenders.
The 40 is the size of the sidewall on the tire. That number varies depending on your drop, camber, rolling or pulling your fenders.
Thread Starter
Junior Member
Joined: Jan 2008
Posts: 16
Likes: 0
From: lawndale, ca, los angles
For my 4cyl, i ran a 18x7.5 with a 42 offset and i needed to get my fenders rolled. I was on s-techs. Wheels were flush with the fenders.
The 40 is the size of the sidewall on the tire. That number varies depending on your drop, camber, rolling or pulling your fenders.
The 40 is the size of the sidewall on the tire. That number varies depending on your drop, camber, rolling or pulling your fenders.
Thread
Thread Starter
Forum
Replies
Last Post
