hey im wondering why my crx shakes so much!
when its cold, it doesnt shake as much
but when it warms up it feels like it is gonna fall apart!
it starts shaking like hell when it hits 3000 rpm
i have a b20!
any reasons what it can be??
and my 1 of my motor mounts r touching metal to metal! bushing is ripped

 

You don't think it's the ripped motor mount bushing?

 

what he said. that could be and probably is your biggest problem right there. get a quality set of mounts. i've always used Hasport and have never been displeased at all.

 

fix this right away, then report back.

 

 

Just in case you're not tired of hearing this....FIX THE MOTOR MOUNT.

 

hey i already fixed the motor mount! now it doesnt shake as much! but i still feel something bumpy which caused it to shake more with the other ripped motor mount! like if the axle is the wrong one or smoething! only when i accelerate i start to feel it! Can i have the wrong axle on? or what can it be!?
please help!

 

what engine harness you use for your b20?

 

i had a issue like this once after breakin a axle, put new 1s in and had a vibration under acceleration, turned out to be a bad ball joint... check ur front end 4 wear, tie rods, ball joints, bushings...

 

i got my harness done by monotech
its converted to obd1

 

you get your done by a ebay user right? how much cost

 

def. a good idea,check it real good