Im selling all my extra parts. Ive gotten bored with my project and it is time for everything to go.

First up is a D-series Spoolin Performance Ramhorn Turbo manifold. It has around 4k on it and is in excellent shape. I made over 500whp with this manifold on a 60-1 turbo
Asking 500 shipped



Next up I have a set of NEW D-series 9:1 SRP Standard bore pistons with Scat H-beam Rods with ARP 2000 rod bolts. Also have a set ACL Race main bearings and rod bearings that are new too. The pistons will need one set of rings as i was installing them in a friends motor the last one bent the ring and he let it get to him and gave up on his build. Asking 580 shipped for all of this together or 500 for just the rods and pistons.





Next up is D series Eldebrock Performer X Intake manifold with the extra 4 injectors and eldebrock fuel rail. I didnt run the extra 4 injectors cause my 1000cc's were plenty. Im asking 260 shipped for this.




Next is a D16Z6 head that was built by JG Engine Dynamics. I made 511whp on this head at 29.5psi. The head was Ported and Polished on the intake and exhaust side and is smooth as a babys *** lol, it also recieved a 5 angle valve job, the bowls were slightly enlargened and polished along with bronze valve guides and new seals installed. It has new skunk 2 Springs and retainers with a ZEX 59500 Cam and a AEM 3 bolt cam gear. I used the head for around 4k as well and then took it off and hade a local machine shop clean it up and resurface it so it is ready to bolt on for the next buyer. I have around 1600 in the head and looking to get 1000 shipped for it. Or will do a package price of the head and intake manifold for 1200 shipped.






Also i have 86-89 integra CG integra tranny with a NEW B16 KAAZ LSD installed for 600 or 100 for the tranny without the lsd installed.

I have a NEW avid b series shift linkage for the cg tranny swap 140 shipped

NIB ARP D16Z6 headstuds-90 shipped

Bare d16z6 block with a micropolished crank for 150

D16z6 Action 2md pressure plate and a 86-89 accord clutchnet 6 puck clutch disc for the cg tranny swap. for 300

Z6 Distributor with a msd coil and msd cap for 75

Ill be posting up more items soon as i have pics. I have tons more of stuff to sell.




Modified by seanc520 at 6:35 PM 11/16/2008

 

pics of head studd are added

 

I want that z6 crank! Let me know what you want for it, shipped to 28334 Thanks. I do have paypal.

 

Bump for a good seller

 

Do you still have the head and manifold?

 

everything is sold!!!!