90 CRX part out, b16a parts
i have an on-going project that i have given up on, so EVERYTHING is for sale!!
most parts off a 90 CRX DX
all prices OBO
Cometic head gasket b16 81.5 mm bore .051" thick 75
B16a block w/ crank fresh out of the machine shop, stock bore, crank std. 250
B16a intake manifold, w/ fuel rail dsm 440 injectors 75
CRX si door panels 100
Door glass 25/each
bare door frames, 25/each (no glass, no door panel)
complete doors 75/each
Hatch w glass, couple small dents and scrapes 50, all glass is good.
old front strut bar, 15
Kteller Exhaust 2.5 kit W/ flowmaster muffler fit pretty good on my crx, quiet too! $200
Crx Climate control unit OK condition 75
All Rear cargo panels and storage bins 200
dash, not great shape, 20
steering column, still has key and switch on it 25
misc. interior pieces 5/each
Rear disk brake swap (integra i think) new pads, rotors, and calipers, also comes with 4040 prop valve and 15/16 master cylinder 275
front brake knuckles (drilled and slotted rotors, new pads, new wheel bearings, new upper and lower ball joints) both sides 125
CRX Cargo cover, need repaired 25
2 cargo covers for a hatchback (not CRX) good condition 50/each
88-89 Si Cluster and cover 50
90-91 Si Cluster and cover 50
Turn signal/headlight/wiper switch, w/ rear wiper control 25
Clear w/black background corner and bumper lights 25
FAZE Big tach, 50
5 15" black rota slipstreams, no curb marks 350 firm
2 well used BFG drag radials 50
bumper cover, cut to fit intercooler 20
B-series Axles good condition 50/each
b-series half shaft 50
Chiped P28 ecu w/o chip and socket 75 w/ chip and socket 110
OBD1 b-series Distributor has OBD0 plug, almost new 100
OBD0 b16 distributor, no plugs. 50
Main wiring harness 100
engine harness for b16 75
complete wiring harness from headlight to taillight, including dash, and engine harness 200
Pm me for pic's of anything
Any thing else you might need, pm me and ask, i might have it
everything needs to go! - reasonable offeres will be consedered. - prices do NOT include shipping.
thanks!
most parts off a 90 CRX DX
all prices OBO
Cometic head gasket b16 81.5 mm bore .051" thick 75
B16a block w/ crank fresh out of the machine shop, stock bore, crank std. 250
B16a intake manifold, w/ fuel rail dsm 440 injectors 75
CRX si door panels 100
Door glass 25/each
bare door frames, 25/each (no glass, no door panel)
complete doors 75/each
Hatch w glass, couple small dents and scrapes 50, all glass is good.
old front strut bar, 15
Kteller Exhaust 2.5 kit W/ flowmaster muffler fit pretty good on my crx, quiet too! $200
Crx Climate control unit OK condition 75
All Rear cargo panels and storage bins 200
dash, not great shape, 20
steering column, still has key and switch on it 25
misc. interior pieces 5/each
Rear disk brake swap (integra i think) new pads, rotors, and calipers, also comes with 4040 prop valve and 15/16 master cylinder 275
front brake knuckles (drilled and slotted rotors, new pads, new wheel bearings, new upper and lower ball joints) both sides 125
CRX Cargo cover, need repaired 25
2 cargo covers for a hatchback (not CRX) good condition 50/each
88-89 Si Cluster and cover 50
90-91 Si Cluster and cover 50
Turn signal/headlight/wiper switch, w/ rear wiper control 25
Clear w/black background corner and bumper lights 25
FAZE Big tach, 50
5 15" black rota slipstreams, no curb marks 350 firm
2 well used BFG drag radials 50
bumper cover, cut to fit intercooler 20
B-series Axles good condition 50/each
b-series half shaft 50
Chiped P28 ecu w/o chip and socket 75 w/ chip and socket 110
OBD1 b-series Distributor has OBD0 plug, almost new 100
OBD0 b16 distributor, no plugs. 50
Main wiring harness 100
engine harness for b16 75
complete wiring harness from headlight to taillight, including dash, and engine harness 200
Pm me for pic's of anything
Any thing else you might need, pm me and ask, i might have it
everything needs to go! - reasonable offeres will be consedered. - prices do NOT include shipping.
thanks!
Last edited by b16_ef; Aug 13, 2009 at 06:29 AM. Reason: updated
i have a 2.5" kteller exhaust kit on the car. no cat, 36" i think resonator and flowmaster muffler. it was very quiet and not raspy at all.
i will try to get some pics up after work today
sucks getting home when it's dark already....
i will try to get some pics up after work today
sucks getting home when it's dark already....
Trending Topics
trade for my 02 400ex with title, 11.1 piston, stage 2 cam, barnett clutch, new tires, 05 plastic with quadtech carbon fiber hood. i jsut want the car minus the turbo kit and wheels. can pick up asap





















