on my 96 civic sidizzy cap i have a pink wire going into the bottom of it, so when i take the screws off i cant detatch the cap cause the wire is in it, how do i do this ?


also my rotor screw is stripped how do i remove that ?

 

you mean you stripped out the top of the screw? you might need to cut a flat notch in it with a dremmel and use a flat head screwdriver.

 

Just be careful not to cut too deep with the dremel. You may want to also try an impact screwdriver...

 

okay so that cleasrs that up

now what about the pink wire going into the bottom of the dizzy cap, i cant seem to take the dizzy cap off cause its in the cap, the three screws come off then on the bottom theres a pink line going into the cap, how do i take this off ?

 

A pink wire? Is it for a tachometer signal? Are you running an external coil?

 

theres a 5th wire on my dizzy its going to a red can mounted on the side of my engine bay . but the wire goes in threw the cap... icant get the cap off with the wire going threw it, and the cap is one of those bullshit see threw caps that go in like 20 k's