i like them they are 16's i just dont know what they are........someone told me enkie

 

they look like enkei rpf-01 knockoff's (they certainly are not real)

other than that, they look similar to a sparco wheel.

however, if you want to know for sure, wait for toyo's answer, he's sure to be along quickly

 

rota msr or one piece work rsbeta

 

or jenkins for that matter

 

hmmmmm the lip is at least 2" deep. im hoping there a good brand.....

 

Based on this picture:


I would say they're Konig Tuners:

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by toyomatt84 &raquo;</TD></TR><TR><TD CLASS="quote">Based on this picture:


I would say they're Konig Tuners:
</TD></TR></TABLE>

in the pic of the konig wheels in between the spokes is more squared off. if you look a a pic that is more of a straight on pic you will see what im talking about. my wheels are more round between spokes

 

looks like konig as well and to the OP : you have to remember that that pic Matt posted was just an illustrative rendering and not the actual wheels so after production, the appearance may come out slightly different but i do understand where u are coming from. either way, back in the mid to late 90's there were almost 10 different replicas of theWork Rsb out on store shelves so this will be a hard find.

any distinctive markings or stamps on the back of the hub, spoke or on the inner barrels?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by killerB16A &raquo;</TD></TR><TR><TD CLASS="quote">

in the pic of the konig wheels in between the spokes is more squared off. if you look a a pic that is more of a straight on pic you will see what im talking about. my wheels are more round between spokes</TD></TR></TABLE>

Well, your wheels appear to be painted, which can throw off perspective slightly.

 

ya they have been painted........i am going to pull a wheel off and see whats on the back side!!!!