I have a 95 civic dx, d15b7 motor, d15z1 head ( i know it may cause me problems but i needed the car on the road or i was going to get fired from my job ).

However, the third hose form the thermostat is loose, i don't find where to connect it!!! It's the thinner hose of the thermostat and it's the third counting from the outside to the inside or center of the head. I got the vx manifold on it ( just in case this could help ) and i got this hose loose, i dont got vtec connected neither.

As far as the o2 sensor, i am missing the plug so i was wondering the order of the wires to plug it into the sensor and put some tape around it or something as i need this done ASAP.


Any help would be greatly appreciated, thanks in advance.

 

post a pic of the hose you are talking about.

 

Tomorrow i will, night time now so picture won't be clear enough.