shifter slop - there's a bolt in mine instead of a roll pin.

Reply Subscribe

Thread Tools

Search this Thread

Oct 10, 2008 | 06:01 AM

wreckedmyteg

Thread Starter

Honda-Tech Member

Joined: Mar 2004

Posts: 884

Likes: 1

From: hick town, WI, USA

shifter slop - there's a bolt in mine instead of a roll pin.

Any one know what size the roll pin is?

My DX sedan has 147k on the clock. I assume they did the clutch, and that's why the linkage was removed.

Oct 10, 2008 | 06:08 AM

b16a1eg6

Honda-Tech Member

Joined: Feb 2006

Posts: 379

Likes: 0

From: augusta, maine, usa

Re: shifter slop - there's a bolt in mine instead of a roll pin. (wreckedmyteg)

What part?

Oct 10, 2008 | 06:17 AM

beana

Junior Member

Joined: Nov 2007

Posts: 264

Likes: 0

From: napoleonville, louisiana, usa

Re: shifter slop - there's a bolt in mine instead of a roll pin. (b16a1eg6)

#29
when i did myu clutch i couldn't get the pin out so i dropped the linkage at the shifter instead ,didn't have any problems

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">Any one know what size the roll pin is</TD></TR></TABLE>

go to your local honda dealer ship and order/buy a pin there about 5 bucks

don't try an auto parts store because they don't carry then

Oct 10, 2008 | 06:17 AM

redsi89

Honda-Tech Member

Joined: Jun 2004

Posts: 152

Likes: 0

From: Brick, NJ, USA

Re: shifter slop - there's a bolt in mine instead of a roll pin. (b16a1eg6)

i dont know what size it is off hand just call honda and get the the roll pin for your car or do it up through majestic and pay for shipping

Oct 10, 2008 | 06:47 AM

slammedeewagon

Honda-Tech Member

Joined: Oct 2008

Posts: 239

Likes: 0

From: lansdale, PA, USA

Re: shifter slop - there's a bolt in mine instead of a roll pin. (redsi89)

the pin cost $1 just buy it

Oct 10, 2008 | 09:44 AM

sanimalp

$cat /dev/urandom

Joined: Feb 2005

Posts: 3,152

Likes: 3

From: Thornton, colorado, usa

Re: shifter slop - there's a bolt in mine instead of a roll pin. (slammedeewagon)

the roll pin is 8mm.

Oct 10, 2008 | 01:54 PM

johnnyonth3spot

Honda-Tech Member

Joined: Mar 2008

Posts: 272

Likes: 0

Re: shifter slop - there's a bolt in mine instead of a roll pin. (sanimalp)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sanimalp »</TD></TR><TR><TD CLASS="quote">the roll pin is 8mm. </TD></TR></TABLE>
x2