i got some profab tri y headers and they hit my trans brace and the bolt so i saw some people just take out the brace so i wanted to know if that is ok to do or do you need to have the brace?

 

im assuming you have type r trans brackets.... i've heard you have to change them out to a gsr bracket.... not sure though, just what i've heard

 

on my gsr i had to take out the front trans brace, the rear one was fine

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by clem kevin &raquo;</TD></TR><TR><TD CLASS="quote">on my gsr i had to take out the front trans brace, the rear one was fine</TD></TR></TABLE>

I had this problem in addition to the front of the oil pan butting up against the header. I had to use a torch on low flame and hammer away making sure you don't crease the pan.

 

Sounds like a good design.

 

sounds like you cant turn it down when you find one for 200$

 

If I had to torch my oil pan and remove the front brace, I would say PASS.