ok so earlier some people where talking about wanting there turn signals and hazards blink hyper and i informed them that all they had to do was replace the #2 resistor in the relay i am back to say that threw trial and error that does not work at all so to correct myself i must in form you that it is in fact the #2 capacitor that you must replace instead now the stock one in there is a 16v 10uf/microfarad so to make it hyper you want a replacement that is at least 16v and less then 10uf like for instance i used a 37v 4.7uf capacitor it makes it hyper with out seeming to be constent on now i am posting pictures of my setup that i made now let it be known i made mine so i can switch between normal and hyper at a flick of a switch

 

Any time I see quick blinkers I automatically assume that a bulb is burned out or the car has an electrical problem. Why would you intentionally want to make your car look like it has an electrical problem?

 

i did it so i can make them hyper when i have my hazards light on to draw attention to myself so people see me sooner and realize that something is wrong and then i can flip the switch for normal driving signals

 

I actually only use my 194 bulbs in my corners lights just cuz I like how they look in the edm corners... and I like to stand out, fast blinkers ftw! haha

but different stokes for different folks...