Hmmm I saw some OBX ITB's for about $800 and I think thats a really good deal for people with low budget builds. Anyone tested 'em? If so anyone have before/after Dyno sheets?

 

Don't think anyone has actually posted on H-T that they have gotten them up & running with a dyno sheet to show.

Here is a link to an on going H-T thread related to the OBX itb's. Don't think anyone has had any updates for a while.
https://honda-tech.com/zerothread/2219288

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GhostAccord &raquo;</TD></TR><TR><TD CLASS="quote">Don't think anyone has actually posted on H-T that they have gotten them up & running with a dyno sheet to show.

Here is a link to an on going H-T thread related to the OBX itb's. Don't think anyone has had any updates for a while.
https://honda-tech.com/zerothread/2219288</TD></TR></TABLE>

Well that post is useless since he didn't get it running.

 

so what OBX ITB's are no good then...

 

say no to crack.

 

I have never seen anyone run a set of OBX itb's. Do they exist? Im going to stick with what I know work's best for me and most of pro A/M guy's run. TWM

Mike

 

havn't heard much of this, TWM ftw!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fillipo &raquo;</TD></TR><TR><TD CLASS="quote">havn't heard much of this, TWM ftw!</TD></TR></TABLE>

Check them out http://www.twminduction.com

 

I didn't get them running because my time in okinawa (I am in the Marine Corps) got cut short and I had to tear my car apart. Also in the middle of putting them together, my brothers house burnt down and I left Okinawa to go home to help him with his house.

And if you get to the last page, someone is running them....and from the way it sounds...they performed well.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mike@Highend Autosports &raquo;</TD></TR><TR><TD CLASS="quote">

Check them out http://www.twminduction.com</TD></TR></TABLE>

lol i meant obx, i actually have TWM ITB's that i am currentyl polishing. Alot of work but it's getting there

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fillipo &raquo;</TD></TR><TR><TD CLASS="quote">

lol i meant obx, i actually have TWM ITB's that i am currentyl polishing. Alot of work but it's getting there</TD></TR></TABLE>

O if you want to see the obx one's goto http://www.obxracingsports.com but I can see you have already made the right choice TWM

 

hey i can't IM you, it's off?!?!?
Wondering about a few things....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by junkyard racer &raquo;</TD></TR><TR><TD CLASS="quote">I didn't get them running because my time in okinawa (I am in the Marine Corps) got cut short and I had to tear my car apart. Also in the middle of putting them together, my brothers house burnt down and I left Okinawa to go home to help him with his house.

And if you get to the last page, someone is running them....and from the way it sounds...they performed well.

</TD></TR></TABLE>

Fashoo.. I might pick these up. If so ill throw down some dyno sheets and see how well they perform

 

ok, so this thread went to asking about obx itb's... to twm>obx, with no clear answers to the related title.

22 pages on the other obx itb thread, and this one doesnt have answers either!

I wish someone would have numbers, or hell just to say they had em and see how they liked them... guess we'll all have to wait and find out

 

So is there an update on this, because I was planning on purchasing these same ITB's?!

 

NO..........