Hi all, just joined to see if i can get some help, i have a clog in my cat and need a new one, i found this one on ebay and was wondering if anyone has ever replaced their cat converter, but did not buy it from Honda becuase of the overwhelming cost of oem parts, if you can take a look at this site and let meknow what you thnk about it and your personal opinion will be greatly appreciated thank you


http://cgi.ebay.ca/ws/eBayISAP...30663

 

Magnaflow/Carsound Universal ~$50

 

And for about $80 you can get a Magnaflow/Carsound cat that has the proper flanges already welded on.

 

edit* miss post., sorry!

 

any help?

 

bump for any opinions

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by no1knows908 &raquo;</TD></TR><TR><TD CLASS="quote">And for about $80 you can get a Magnaflow/Carsound cat that has the proper flanges already welded on.</TD></TR></TABLE>

From where?

 

would it be a direct bolt on to an sh?

 

Pay some damn attention. This has been covered many times in other threads and your question has already been answered in this thread. But for clarification, and I'll make this as simple as possible....GET A MAGNAFLOW/CARSOUND UNIVERSAL HIGHFLOW CATALYTIC CONVERTER. If you want it to bolt up to your stock exhaust system, purchase some flanges and have them welded on. If you don't want to do that, cut the flanges off your stock cat, and reweld them onto the highflow cat. This will make it a direct bolt-on. You can also just remove the old cat and weld the new cat in place, without flanges. Magnaflow/Carsound highflow cats can be purchased on eBay and other websites. You can also order them at your local muffler shop. Prices have also already been covered. Pick one, go do it, and be done.