i have a built high compression b18a1 in my 91 civic hatch. the car was just recently built and converted to obd1. im throwing code 7, which i found online to be the tps sensor. how could this be considering it is a brand new blox tps sensor to match the blox throttle body and manifold. can anyone help me with this im trying to fix this so i can get tuned.

 

Test it, make sure you get a constant change in voltage from closed to open and make sure it is adjusted properly

 

ill check it again tomorrow but when we put the new throttle body and tps in we set it and rechecked it. i will go back over everything again tomorrow and let you know

 

Just make sure the closed voltage is .45 with the ignition on

 

I always set TPS's according to WOT 4.5v, seen way too many stock cars with anywhere from 0.3v to 0.65v closed throttle from the factory.

 

i will check everything out tomorrow and post results thanks for the input.

 

closed voltage was .48, i set it to .45 hopefully i wont throw code now.