Built b20 block, gsr head, red ek (96-98) body parts and springs FS
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 1,832
Likes: 0
From: RIP Duke of Turbo, CA
Built b20 block, gsr head, red ek (96-98) body parts and springs FS
Ok I have a 96 gsr head, a built b20 block and some springs (race for an ej1 and sports for an ek) for sale. The springs will fit either ek's or eg's. All parts located in the I.E. (Riverside/San Bernardino) area.
History on the b20 block:
I bought it a few years back when I knew even less than I do now (hard to believe I know) and ran it for ~50miles. It never ran quite right as I never had it tuned and the comp on the block is somewhere around 12/12.5:1. It just bogged a lot and had very little power, I have leakdown tested it and the test turned out perfect. It needed to be tuned to run correctly but I didn't know that at the time. I pulled the engine and put in a gsr as I got a really good deal on one. And the block has been garaged ever since......
The block has an str blockguard in it, je pistons and eagle rods. The pistons are std bore (84mm). This block is also really high comp and I would suggest having the clearances checked before putting a head on and turning over. Asking $800 and I will throw in the headstuds (no nuts or washers).
96 GSR head with rails, intake manifold and cams (b17 cams), and ugly valvecover (you can always paint it). Only missing the vtec solenoid. Asking $325 picked up
Pictures:
Block
Head
I also have EK parts for sale. My ek was stolen and stripped and I was gonna use these and just get them painted but I got lucky and found black body parts for sale so I need to sell these. I also have an unpainted black bumper, black sideskirts, drivers side door (with all the electrical stuff from an ex) and headlights (they are a bit foggy inside, but there are plenty of threads that tell you how to make them nice and clear) for the same car. I also have some brand new neuspeed sport springs and a black grill for the same car. Forgot about these. Make me offers for all the body parts. I'm not tryin to make a killing on these, I will give you a deal..........
Sideskirts SOLD
Picts.............
Body Parts
Neuspeed Race Springs
Neuspeed Sport Springs
Thanks for looking and pls bump.
Modified by KeyserSoze at 4:10 PM 8/26/2008
History on the b20 block:
I bought it a few years back when I knew even less than I do now (hard to believe I know) and ran it for ~50miles. It never ran quite right as I never had it tuned and the comp on the block is somewhere around 12/12.5:1. It just bogged a lot and had very little power, I have leakdown tested it and the test turned out perfect. It needed to be tuned to run correctly but I didn't know that at the time. I pulled the engine and put in a gsr as I got a really good deal on one. And the block has been garaged ever since......
The block has an str blockguard in it, je pistons and eagle rods. The pistons are std bore (84mm). This block is also really high comp and I would suggest having the clearances checked before putting a head on and turning over. Asking $800 and I will throw in the headstuds (no nuts or washers).
96 GSR head with rails, intake manifold and cams (b17 cams), and ugly valvecover (you can always paint it). Only missing the vtec solenoid. Asking $325 picked up
Pictures:
Block
Head
I also have EK parts for sale. My ek was stolen and stripped and I was gonna use these and just get them painted but I got lucky and found black body parts for sale so I need to sell these. I also have an unpainted black bumper, black sideskirts, drivers side door (with all the electrical stuff from an ex) and headlights (they are a bit foggy inside, but there are plenty of threads that tell you how to make them nice and clear) for the same car. I also have some brand new neuspeed sport springs and a black grill for the same car. Forgot about these. Make me offers for all the body parts. I'm not tryin to make a killing on these, I will give you a deal..........
Sideskirts SOLD
Picts.............
Body Parts
Neuspeed Race Springs
Neuspeed Sport Springs
Thanks for looking and pls bump.
Modified by KeyserSoze at 4:10 PM 8/26/2008
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 1,832
Likes: 0
From: RIP Duke of Turbo, CA
Re: Built b20 block, gsr head, red ek (HondaGuy951)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HondaGuy951 »</TD></TR><TR><TD CLASS="quote">Thieves........ BANG---------> 
HEADSHOT! 
TTT!
Flakers
</TD></TR></TABLE>
Lol! Amen brotha!! Spent $800 to get it outta impound, $300 for a new si front end, $500 for si interior, $150 for an si cluster all the time and $$$ spent to replace the column and the steering wheel. Man that **** is annoying!! Thieves should be publicly flogged and sodomized!
Thnx for the bump.
TTT!
Flakers
</TD></TR></TABLE>Lol! Amen brotha!! Spent $800 to get it outta impound, $300 for a new si front end, $500 for si interior, $150 for an si cluster all the time and $$$ spent to replace the column and the steering wheel. Man that **** is annoying!! Thieves should be publicly flogged and sodomized!
Thnx for the bump.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 1,832
Likes: 0
From: RIP Duke of Turbo, CA
Re: Built b20 block, gsr head, red ek (weaksoN!)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by weaksoN! »</TD></TR><TR><TD CLASS="quote">another day of bumping yO! </TD></TR></TABLE>
Hahah
Thanks guys.
</TD></TR></TABLE>Hahah
Thanks guys.
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 1,832
Likes: 0
From: RIP Duke of Turbo, CA
Re: Built b20 block, gsr head, red ek (HondaGuy951)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HondaGuy951 »</TD></TR><TR><TD CLASS="quote">good ****!! </TD></TR></TABLE>
Thnx.
</TD></TR></TABLE>Thnx.
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 1,832
Likes: 0
From: RIP Duke of Turbo, CA
Re: (suprmods)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by suprmods »</TD></TR><TR><TD CLASS="quote">pm</TD></TR></TABLE>
Replied.
Replied.
