Where would I get something like this done? I just want to bench flow test them to make sure they check out.

 

RC Engineering


Edo

 

http://www.witchhunter.com/

http://www.deatschwerks.com

 

Thanks for the links. I would like to know if anyone else has used either one of these services? Deatschwerks seems to offers more stuff.

 

You can try http://kgparts.com/index.php?page=fuelinjectclean $6 per injector for testing or $16 for cleaning and testing

 

You should have a local place to clean and test them....doesn't need to be a special performance lab

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by psycheus &raquo;</TD></TR><TR><TD CLASS="quote">Thanks for the links. I would like to know if anyone else has used either one of these services? Deatschwerks seems to offers more stuff.</TD></TR></TABLE>

I've used witchhunter, and have no complaints about them.

 

I've used cruzin performance (not sure if they're still around) and I think witch hunter. But like someone else said, if you call around to some local shops they might have something

 

RC Engineering, hands down the only place i would ever send my injectors.

A lot of places claim cleaning by flushing the injector with some form of solvent, this is not correct, and I would say this is a case of you get what you pay for.

 

Yeah, RC gets my vote and my money, especially 'cause they're right down the street, but the east coast guys might wanna try these guys...looks economical?

KGParts.com or injector-rehab.com (same guys)
409 rt 30 white horse pike suite c
somerdale,NJ 08083
856-346-2778
I'm not vouching for these guys, just sharing info I've had laying around......good luck...

EDIT: SORRY TO CRX JIMMY, I just read YOUR post of the same info! damn!!!

 

Another option is http://www.injector.com. Used them in the past without any problems.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ekasey &raquo;</TD></TR><TR><TD CLASS="quote">RC Engineering </TD></TR></TABLE>

x2

If you have any questions, please let me know.

John Park

General Manager
RC Engineering, Inc.





Modified by xtrac1 at 10:06 AM 8/12/2008

 

Russ Collins FTW.

 

Yes I would like to get the full details of what you do and how much it will cost. Also where would I need to ship them?

Thanks,

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MSchu &raquo;</TD></TR><TR><TD CLASS="quote">Russ Collins FTW.</TD></TR></TABLE>

He's ok.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by psycheus &raquo;</TD></TR><TR><TD CLASS="quote">Yes I would like to get the full details of what you do and how much it will cost. Also where would I need to ship them?

Thanks,</TD></TR></TABLE>

We'll test the injectors to establish a baseline. We check the flow rate, spray pattern and look for any leaks/drips. Then we clean the injectors ultrasonically in a solution while they're pulsed on and off. We remove the filters and backflush them under high pressure. Install new filters, o-rings and other misc parts. Test the injectors again to make sure they're all within spec. A calibration report is included with the before/after data.

If the injectors are less than a year old, they are still under warranty and this service is done at no charge, as many times as you wish. Otherwise, it's $24.00 per injector, with a 1-2 business day turn around time.

If interested, ship them to:

RC Engineering
20807 Higgins Ct.
Torrance, Ca 90501

 

RC Cleaned the injectors on one of the fastest 24 hours of LeMons challengers ever.

We consulted with John to see what the best solution would be, he recommended a thorough cleaning and testing like below on our 15+ year old injectors

they went from flowing barely anything 110cc, dripping leaking etc. to 100% perfect condition.

The additional power and reduced fuel consumption gave us the ability to go from dead last after an incident (91st) and an hour down to 5 laps off the lead and 20th over all.




<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xtrac1 &raquo;</TD></TR><TR><TD CLASS="quote">

He's ok.

We'll test the injectors to establish a baseline. We check the flow rate, spray pattern and look for any leaks/drips. Then we clean the injectors ultrasonically in a solution while they're pulsed on and off. We remove the filters and backflush them under high pressure. Install new filters, o-rings and other misc parts. Test the injectors again to make sure they're all within spec. A calibration report is included with the before/after data.

If the injectors are less than a year old, they are still under warranty and this service is done at no charge, as many times as you wish. Otherwise, it's $24.00 per injector, with a 1-2 business day turn around time.

If interested, ship them to:

RC Engineering
20807 Higgins Ct.
Torrance, Ca 90501

</TD></TR></TABLE>

 

Yay getting my injectors back soon. Good thing I tested them, they said some where pretty off.

1- 413
2- 424
3- 434
4- 430

Now all of them are calibrated at 440. Great service, would recommend to anyone with RC's, get a hold of John.

 

Just got back the injectors and the look brand new. Nice work from RC. Total was only $105. I'll post pictures soon.