Not sure if the topic has been covered but I am looking for ways to mount a 92-95 Civic half rad in a DC/DB with a turbo set up. I am running a RCautoworks ram horn manifold w/ 3in downpipe and dump and a Mishimoto half sized rad. Even leaning the rad back under the top of the core support leaves the rad 1/4" or so away from the downpipe and doesnt look safe heat wise. Looking for ways you guys have fab'ed up a way to mount the half sized rads in the DC/DB chassis. TIA

 

its very easy. drill out the spot welds on the lower mounts, move them to hold the civic studs and weld them back in place on the support.

 

thats what i did to put a gsr radiator in my eg...I've got a pfab mani and down pipe in my other eg and im actually getting ready to turn the radiator a little bit to get some more clearence...I'll proly end having to make a shroud for it also to get air into it