I wrecked my car and am leaving for college so i am trying to sell allot of my car parts before i leave.

1. I have a 90 Si Cable tranny that has no grinds as of when the vehicle was last driven in march. I put all polyurethane shifter bushings and a short shifter in the car that will also be included in the auction. The tranny has an OBX LSD in it that worked flawlessly for the 2 months i daily drove the car prior to going into the ditch. Id like to let the tranny and all stuff with it go for 350$ OBO

2. I also got a D16Z6 from the same car. I bought the motor from a wrecked 94 civic EX last fall with 78,XXX miles on it. The motor has run flawlessly for me always firing right up and not smoking or anything. The bottom end of the motor has never been apart minus me drilling and welding an oil return into the oil pan. At this same time i had the head ported and mildly polished and reassembled. I had the plans of turboing the car once winter was over but ended up wrecking teh car late in march. I have STD bore vitara pistons and I beam rod's that i had planned on putting in the motor that will also be included with the motor. THe motor pulled real hard and also has a port matched D16y8 intake manifold and a LS throttle body that has also been port matched. Id be willing to let the motor go with the internals unistalled for 700$ OBO

3. I haev all piping needed to make a 3" exhaust turbo back including flanges from a CRX id be willing to let that go for 175$

4. I have a crower Stage 2 Turbo cam for the D16z6 but dont have springs or retainers. Id be willing to let that go for 225$

5. I have a full turbo kit for a D series as well. It has a striaght T4 turbo that is not a knockoff ebay turbo with a .68 hot side and im not sure what the hot side it but it has no shaft play and is in excellent shape. I have an OBX manifold and wastegate with dumptube. Theres also a greddy knock off blow off valve and i have a GIANT front mount i dont think would fit in a EF and also 2 DSM sidemounts. I have an oil T and line that will go with the kit as well and im sure i could find enough piping laying around to piece together ghetto chargepipes. Id be willing to let teh turbo kit for 550$ OBO

6. I got two chipped pm6's one is a ps9 ecu set up for one wire vtec and the other is a regular pm6 i can also include a DIY wideband that works but needs a new o2 sensor and also a chip burner and chips for each ecu. Id let the ecu go for 75$ and the wideband and burner and ecu go as a package for 200$

All of these prices are without shipping and you can contact me on aim at ridenismo or email me at dombertj1@acad.sunybroome.edu

 

i forgot to add i also have D2 36 way adjustable coilovers that are ride hieght and preload adjustable and all that good stuff. They were brand new when i got them and were used only for street purposes, never abused. Im not sure what the spring rates are but id let them go for 550$ OBO

 

bump some has to want some of this ****

 

good prices