Prelude JRSC Kit, Kamikazie header, DSM 450s, etc
Thread Starter
Junior Member
Joined: Dec 2003
Posts: 274
Likes: 0
From: Northwest, In
Prelude JRSC Kit, Kamikazie header, DSM 450s, etc
Ok well i have a partial JRSC. Yea it was partial when i bought it but i made a few pieces
Contact me at qveonmail(at)comcast.net
Ok so here we go, Kit has:
-Blower with 5k on it, then an endyn service to clean to coating off and polish (search if you dont know what i am talking about) then another 5k on it
-Main brace with all pullies, Jackshaft with stock pullies. Shaft rebuilt with resurfaced axle and new bearings
- JR's Rising rate FPR
- Gatorback belts that i have been using for like 1500 miles.
- The CAI too if you want it
Well this is what it doesnt have that i know about:
-Non-SH kit so no oil filter relocator
-IACV bracket, i have made my own to improvise so you dont have to order a $300 part. Works great!
- Jackshaft adjuster. I just put my torque wrench on it and tightened the bolts.
- I think the A/C support bracket. I have been using just the Alternator bracket and it works great.
- No gaskets. Been using black gasket maker with no issues.
Asking $1000 WHAT A DEAL! $2300 LESS then new!:bigthumb:
DSM 450cc's $50
"Qveon what else do you have?"
WELLLLLL to compliment the JRSC i aslo have a Kamikaze Header in silver! I have cut off the Cat flange cause it wasnt needed but beyond that only a small scuff on it and a little spot rusting on downpipe. Ill include my magic bolt setup so it doesnt eat gaskets!
Asking $175! Thats 1/2 off buying NEW!:bigthumb:
I also have a Autometer white face vac/boost gauge and a/f gauge. I figure $30/pair
<FONT SIZE=""4"">Buy the whole lot and and I'll give you a deal! $1250 for JRSC, header, gauges, DSM 450cc's</FONT>
Disclaimer:
Need any pics i guess ask and ill get some if you want to buy. They look like any of the other pics on the internet. Parts are still installed on the car, will be disassembled as soon as money hits my paypal or my hand. Shoot me offers. JRSC must be sold before i part with anything else. Shipping i usually do UPS ground but ill work with you. References (eBay: mjwanke) Anything else i can do to help you out hit me up.
Contact me at qveonmail(at)comcast.net
Ok so here we go, Kit has:
-Blower with 5k on it, then an endyn service to clean to coating off and polish (search if you dont know what i am talking about) then another 5k on it
-Main brace with all pullies, Jackshaft with stock pullies. Shaft rebuilt with resurfaced axle and new bearings
- JR's Rising rate FPR
- Gatorback belts that i have been using for like 1500 miles.
- The CAI too if you want it
Well this is what it doesnt have that i know about:
-Non-SH kit so no oil filter relocator
-IACV bracket, i have made my own to improvise so you dont have to order a $300 part. Works great!
- Jackshaft adjuster. I just put my torque wrench on it and tightened the bolts.
- I think the A/C support bracket. I have been using just the Alternator bracket and it works great.
- No gaskets. Been using black gasket maker with no issues.
Asking $1000 WHAT A DEAL! $2300 LESS then new!:bigthumb:
DSM 450cc's $50
"Qveon what else do you have?"
WELLLLLL to compliment the JRSC i aslo have a Kamikaze Header in silver! I have cut off the Cat flange cause it wasnt needed but beyond that only a small scuff on it and a little spot rusting on downpipe. Ill include my magic bolt setup so it doesnt eat gaskets!
Asking $175! Thats 1/2 off buying NEW!:bigthumb:
I also have a Autometer white face vac/boost gauge and a/f gauge. I figure $30/pair
<FONT SIZE=""4"">Buy the whole lot and and I'll give you a deal! $1250 for JRSC, header, gauges, DSM 450cc's</FONT>
Disclaimer:
Need any pics i guess ask and ill get some if you want to buy. They look like any of the other pics on the internet. Parts are still installed on the car, will be disassembled as soon as money hits my paypal or my hand. Shoot me offers. JRSC must be sold before i part with anything else. Shipping i usually do UPS ground but ill work with you. References (eBay: mjwanke) Anything else i can do to help you out hit me up.
Thread
Thread Starter
Forum
Replies
Last Post
