1/8 mile, turbo sol, first time on slicks
I posted this over in the Drag Racing forum, but i'd like some input from you guys too.
First my setup:
'94 Del Sol VTEC
B16A2 stock internals
SLS Shorty manifold; 3" open downpipe; WG dump
Garrett T3/T04E .63/.60 57 trim @ 10psi
Chinese Bar & Plate IC
Precision 780cc injectors
Walbro 255
E85
ITR Intake manifold
64mm TB
Crome free
Ksport coilovers
Full Race traction bars
Exospeed Racing Wheels
23x8x13 M&H Racemaster slicks
Car weighs 2660 going down the track
Launching at 8200 under preload, Full throttle shifting @ 8500. I can't get it to build any boost off the line, so Crome Pro w/ Gold ROM is my next investment.
1.88 and 1.96 60' respectively on the video, any tips to get it lower are appreciated.
Video:
Pics:





Modified by 91civicDXdude at 3:42 PM 6/20/2008
First my setup:
'94 Del Sol VTEC
B16A2 stock internals
SLS Shorty manifold; 3" open downpipe; WG dump
Garrett T3/T04E .63/.60 57 trim @ 10psi
Chinese Bar & Plate IC
Precision 780cc injectors
Walbro 255
E85
ITR Intake manifold
64mm TB
Crome free
Ksport coilovers
Full Race traction bars
Exospeed Racing Wheels
23x8x13 M&H Racemaster slicks
Car weighs 2660 going down the track
Launching at 8200 under preload, Full throttle shifting @ 8500. I can't get it to build any boost off the line, so Crome Pro w/ Gold ROM is my next investment.
1.88 and 1.96 60' respectively on the video, any tips to get it lower are appreciated.
Video:
Pics:





Modified by 91civicDXdude at 3:42 PM 6/20/2008
do you have anti-lag? i would sit on it for a little bit, it seems you rev it up and just go
set up anti-lag and sit at the line letting it build up some boost
also whats the tire pressure in your slicks?
i was cutting about the same times in my teg with similar setup with drag radials
set up anti-lag and sit at the line letting it build up some boost
also whats the tire pressure in your slicks?
i was cutting about the same times in my teg with similar setup with drag radials
Just curious do you have a lsd. Thats pretty much the same setup I have and I was wondering what a set of slicks will do for me. On street tires with no lsd I went 9.2@88 You had a nice run, man I was hoping like hell you'd smoke those v8s good job.
Trending Topics
i was sitting on the 2 step for a few seconds in the first vid, you just can't hear it over the mustang. I don't have an anti lag setup, but that is my next investment. The 2nd run i admit i was a bit slow on the rev limiter.
I am using an OBX LSD.
10-11psi in the slicks, my $.99 cent tire gauge isn't very accurate at low pressure. I know i should've lowered the pressure but it seems there is a very fine line between bogging and spinning the slicks halfway down the track. I'm going to 1/4 mile this wednesday so i'll try to work on a few of the suggestions i've got so far.
as far as the banshee.. they actually have a 4 wheeler class at that track becuase there is a gang of banshee dudes that are regulars.. those things are FAST
I am using an OBX LSD.
10-11psi in the slicks, my $.99 cent tire gauge isn't very accurate at low pressure. I know i should've lowered the pressure but it seems there is a very fine line between bogging and spinning the slicks halfway down the track. I'm going to 1/4 mile this wednesday so i'll try to work on a few of the suggestions i've got so far.
as far as the banshee.. they actually have a 4 wheeler class at that track becuase there is a gang of banshee dudes that are regulars.. those things are FAST
Thread
Thread Starter
Forum
Replies
Last Post
racinskittle
Drag Racing
4
Jul 6, 2005 06:47 AM




