fs: jdm front end-GT40R-itr tranny-teg parts PICS
have been collecting parts and working on building this car for about 8 months and have come to the point where I cant continue. I will sell off my entire project 
Most of the stuff is OBO but please PM me the offers.
b18c 2.0 litre-$3000
built by ABACUS racing in va beach. I cant remember every part of the motor but its fully built. The only stock parts in the motor are the crankshaft and cams. All of the motor work came up to $4500. It was built for forced induction but has never seen it, was put into a daily driver and has acquired around 10,000 miles. A compression test was taken before the motor came out of the car and it was between 155 and 160 on all 4 cylinders.
darton sleeves
forged piston/rods
9:1 compression
head was ported/polished
all valve train is upgraded aswell.
jg eldebrock intake manifold
jg eldebrock 70mm throttle body
engine wire harness
94 JDM itr front end shell-sold
ITR transmission with Quaffi-$1500
-no grinds
-4.4 Final Drive
Inline pro turbo kit-sold
ACT Clutch Organic Street Disc with Heavy Duty Pressure Plate - $125
-399 new
-10,000 miles
Toda flywheel-sold
-http://www.modacar.com/products/Acura/Integra/MODAFLY/flywheel.html
Integra optional side skirts-$125
-Fiber glass
shift linkage-$80
PLX devices wideband o2-$175
1/2 shaft-$60
If you have any questions please feel free to email me or pm me
ernest.anderson@gmail.com
Thanks!
Modified by swtch7 at 10:07 PM 7/10/2008

Most of the stuff is OBO but please PM me the offers.
b18c 2.0 litre-$3000
built by ABACUS racing in va beach. I cant remember every part of the motor but its fully built. The only stock parts in the motor are the crankshaft and cams. All of the motor work came up to $4500. It was built for forced induction but has never seen it, was put into a daily driver and has acquired around 10,000 miles. A compression test was taken before the motor came out of the car and it was between 155 and 160 on all 4 cylinders.
darton sleeves
forged piston/rods
9:1 compression
head was ported/polished
all valve train is upgraded aswell.
jg eldebrock intake manifold
jg eldebrock 70mm throttle body
engine wire harness
94 JDM itr front end shell-sold
ITR transmission with Quaffi-$1500
-no grinds
-4.4 Final Drive
Inline pro turbo kit-sold
ACT Clutch Organic Street Disc with Heavy Duty Pressure Plate - $125
-399 new
-10,000 miles
Toda flywheel-sold
-http://www.modacar.com/products/Acura/Integra/MODAFLY/flywheel.html
Integra optional side skirts-$125
-Fiber glass
shift linkage-$80
PLX devices wideband o2-$175
1/2 shaft-$60
If you have any questions please feel free to email me or pm me
ernest.anderson@gmail.com
Thanks!
Modified by swtch7 at 10:07 PM 7/10/2008
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94lsvtec »</TD></TR><TR><TD CLASS="quote">pm'd</TD></TR></TABLE>
responded
responded
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
swtch7
Mid-Atlantic (Sales)
11
Aug 14, 2009 05:33 AM





