im lookn to build a b18b and turbo charge it does anyone know a good way thats not expensive and have any suggestions on what is best to do any and all advice is welcome.i have a gt35r turbo to install my budget is 4,000 on motor and im selling my fully built n/a gsr 4 the turbo kit i am looking to run at least low 12s in the quater if the 35r is not a good turbo what is the motor is going in a 95 ej that still needs a little more suspension work and its good but the n/a thing is hard on my pockets lol i was told to just have the motor machined arp studs and built valvetrain and tune and set boost around 12-15psi like i said any and all suggestions are welcome thanx


Modified by civacman at 9:27 AM 6/19/2008


Modified by civacman at 3:19 PM 6/24/2008

 

You dont really need to build since you wont be boosting that much.
Just throw it on the stock motor and build a spare motor on the side while you still have fun.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civacman &raquo;</TD></TR><TR><TD CLASS="quote">im lookn to build a b18b and turbo charge it does anyone know a good way thats not expensive and have any suggestions on what is best to do any and all advice is welcome.i have a gt35r turbo to install </TD></TR></TABLE>

what does your budget look like? in order to take advantage of your 35r u will at least want to do a mild build with forged pistons and rods, since that turbo doesnt even shine til 450+ hp,

but if i was in your boat, i would prob boost the stock motor for a little while @ around 300-350hp, while building a sleeved short block on the side, cause unless your shooting for 500-650hp that turbo is overkill imo