Scat Forged H Beam Rods With 76MM Ycp Vitara Pistons D16 D16z6 D16y8
Thread Starter
Honda-Tech Member
iTrader: (3)
Joined: Nov 2007
Posts: 1,705
Likes: 1
From: SAN DIEGO, CA 92116
Scat Forged H Beam Rods With 76MM Ycp Vitara Pistons D16 D16z6 D16y8
I Have a set of scat H Beam Rods Forged High Quality 4340 forged Aircraft Steel
Fully profiled for stroker engines
Each forging is X-rayed, sonic tested, and magnafluxed
Shot peened to stress relieve surfaces
Packaged in weight matched sets ± 1 gram
Rated for engines up to 650 HP
The Pistons Are Ycp Vitaras 40over 76mm they are in great condition they have a slight scuffing on 1 of the sides from normal wear
this set only had about 75 miles when i noticed my block has piston slap from being bored incorrectly my machine shop bored it to forged 76mm piston specs which is bigger than what cast iron pistons use my fault since i didn't provide them with the pistons
i ended up taking the motor back apart and had the rods balanced and never put it back together so here they are. 
the rods costed me 320 new pistons where 130 and rod balancing was 65 im asking 300 shipped obo for everything.
thats obo so let me know what you have to offer.
<center>
</center>
found the arp 2000 bolts so they are included also.
Modified by JDM-JAMES at 7:55 PM 6/9/2008
Modified by JDM-JAMES at 10:28 PM 6/9/2008
Fully profiled for stroker engines
Each forging is X-rayed, sonic tested, and magnafluxed
Shot peened to stress relieve surfaces
Packaged in weight matched sets ± 1 gram
Rated for engines up to 650 HP
The Pistons Are Ycp Vitaras 40over 76mm they are in great condition they have a slight scuffing on 1 of the sides from normal wear
this set only had about 75 miles when i noticed my block has piston slap from being bored incorrectly my machine shop bored it to forged 76mm piston specs which is bigger than what cast iron pistons use my fault since i didn't provide them with the pistons
i ended up taking the motor back apart and had the rods balanced and never put it back together so here they are. the rods costed me 320 new pistons where 130 and rod balancing was 65 im asking 300 shipped obo for everything.
thats obo so let me know what you have to offer.
<center>
</center>
found the arp 2000 bolts so they are included also.
Modified by JDM-JAMES at 7:55 PM 6/9/2008
Modified by JDM-JAMES at 10:28 PM 6/9/2008
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
DelSolDon
For Sale
43
Apr 2, 2011 11:29 AM
