name all the little things you needed for a turbo install!

this will be great for all those doing their own install for the 1st time

 

BFH

 

socket wrench. sockets

wrenches

sodering gun

vice grips

wd40

socket extension

I think thats all I used.

 

drill, hand tools, bubble gum, duck tape and some wood glue

 

lots of swear words!

lucas569<---- who couldn't undo the cat bolts and slammed a wrench on the ground, wrench bounces up hits side of door leaving small dent!

 

yeah that too..

 

Band aid's for your busted knuckles hehe.

 

Die grinder/dremel with lots-o-cutoff wheels.
Hacksaw.

 

-dremel with cutting bits
-3/8" titanium drill bits to cut your block for turbo clearance and drill IC mounting holes on your bumper support
-8mm, 10mm, 12mm, 13mm, 14mm, 17mm wrenches
-10mm, 12mm, 13mm, 14mm, 17mm socket with 6" extension ratchet
-6.5mm hex key for the tial WG bolts
-flat and phillips screwdrivers
-jack, jackstands
-scissors to cut fuel lines for inline pump
-vice grip
-sharp blade to splice wires for fuel pump and black electrical tape
-Snap ring pliers for HKS SS bov
-lotsa beers, radio and cuss words..

hehehe, damn, I can't believe I memorize them all......;P

 

everything that was mentioned i used except for snap ring pliers ... i spent a small fortune on tools